Electronics mount for Anet A8 (MKS V1.5 + 1 or 2 Mosfet + Raspberry Pi 3 or Orange Pi Lite)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was inspired by the design of dldesign, so I created this version for the MKS Base V1.5 board, to be able to mount…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I was inspired by the design of dldesign, so I created this version for the MKS Base V1.5 board, to be able to mount it on the Anet A8's acrylic frame. You can also place a mosfet for the hotbed and a Raspberry Pi 3 Model B.
Enjoy!
UPDATE 25-Mar-18:
Added another version with 2 mosfets. I hope you like it!
UPDATE 27-Mar-18:
Added a version which supports OrangePi Lite instead of the Raspberry Pi 3. The distance between holes for the Orange Pi Lite is 63 x 42 mm. Enjoy
Print Settings
Printer:
Anet A8
Rafts:
No
No
Resolution:
0.2
10%
Notes:
Consider these printing parameteres:
0.210% Infill
1.2mm wall thickness
1.0 mm top/bottom layer thickness (5 bottom and top layers)
Post-Printing
There are screw holes for the every board (MKS, Raspberry and mosfet) and 4 holes that only go into the acrylic frame.
First, you have to place the mount into the frame using the screws with the red arrows. Then you can start placing the electronics.
See the pictures.
How I Designed This
I used Fusion 360
Category: 3D Printer Accessories