Raspberry Pi 3 Model B 30 mm Fan Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a remix from Homwer's 40mm fan mount, for the 30 mm Pi Fan and without the leds and that stuff. This is still a…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 234
- Wydruki
- 3
- Wyświetlenia
- 1424
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This a remix from Homwer's 40mm fan mount, for the 30 mm Pi Fan and without the leds and that stuff.
This is still a work in progress because the raspberry pi screws are still a little bit tight fit.
You can use either M2.5x18 or M3x18 screws so the mount and the fan is higher enough to give some clearance to the Gpio pins and the camera connector.
It's fast to print and low filament.
Enjoy!!
Updated 17/01/2018:
The raspberry pi screws were misaligned, but now they're corrected.
Update 10/10/2020:
There's still an issue with the holes spacings and I'm unable to fix it, so I recommend using this remix instead: https://www.thingiverse.com/thing:3722799
Print Settings
Printer:
Anet A8
Rafts:
Doesn't Matter
No
Resolution:
0.2
Category: Electronics