1 / 1
PandaPlacer A1 dual height fiducial fixture — zdjęcie 1

PandaPlacer A1 dual height fiducial fixture

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Add dual height fiducials to your PandaPlacer A1. Use the OpenPnP I&S calibration routines to completely rock your A1!

Ocena
0 / 5
Polubienia
5
Pobrania
148
Wydruki
0
Wyświetlenia
675
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
GNU General Public License v2.0

Add this to your PandaPlacer A1 next to the up camera, and get full dual-level calibration abilities within OpenPnP. Follow the OpenPnP Issues & Solutions for the best possible calibration.

Photo print a set of squares. Example file included. These are nominally 20 x 20 mm black, with a 1 mm diameter white dot centered in the middle. Use matte photo paper, or cover in matte adhesive tape. When cutting, make the squares slightly small - 19 x 19 mm works.

Mount the calibration target to the up camera plate, which also holds the discard bin. Use 2x M3 screws of a secretive length that I just don't remember.

Double stick these into the calibration pockets, and start calibrating via OpenPnP Issues & Solutions. When you're done, you'll have a mega-precise pick and place machine. What? You haven't solved the parts feeder issue yet?

The original is here in OnShape.

Tagi