PandaPlacer A1 dual height fiducial fixture
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add dual height fiducials to your PandaPlacer A1. Use the OpenPnP I&S calibration routines to completely rock your A1!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 147
- Makes
- 0
- Views
- 672
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
Add this to your PandaPlacer A1 next to the up camera, and get full dual-level calibration abilities within OpenPnP. Follow the OpenPnP Issues & Solutions for the best possible calibration.
Photo print a set of squares. Example file included. These are nominally 20 x 20 mm black, with a 1 mm diameter white dot centered in the middle. Use matte photo paper, or cover in matte adhesive tape. When cutting, make the squares slightly small - 19 x 19 mm works.
Mount the calibration target to the up camera plate, which also holds the discard bin. Use 2x M3 screws of a secretive length that I just don't remember.
Double stick these into the calibration pockets, and start calibrating via OpenPnP Issues & Solutions. When you're done, you'll have a mega-precise pick and place machine. What? You haven't solved the parts feeder issue yet?