Hardware/Support free Small Turntable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small easy and fast printing turntable.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 163
- Wydruki
- 1
- Wyświetlenia
- 822
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Super easy print with no supports or extra hardware. Fully 3d printed.
Super glue required to for only one part, the Tuning Knob.
Your gear will turn more freely and smoothly if you sand down the round axis that inserts into the gear. WD40 will also aid in this.
If you have any problems feel free to reach out to me.
You will need to reorientate the models. the gears should print larger side up. The rest should be easy enough to figure out the correct orientation.
Edit: you may want to apply glue to the interior of the axis for the vertical gear. That way when you insert the Axis cap (for the vertical gear) it locks it on there.
I didn't think of this beforehand. My model slipped off the table and somehow the vertical gear came loose from the axis, and since I glued the knob onto the gear, I can't get to the axis cap inside of it. So, I had to reprint those parts for myself.