1 / 2
GripX/GripX2 HSC dial for Grip2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GripX/X2 HSC dial for Fox 36/38 Grip2 Forks
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 317
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Don't have the money to upgrade your Grip2 equipped Fox36/38 to the new GripX / GripX2 damper?
I got you!
This model allows you to upgrade your Grip2 HSC dial to the new version!
My print settings:
- PLA (use any filament/colour you like!)
- 0.1mm layer height
- Simple supports, manually placed on the flat bottom parts of both the dial
Grip2 dial assembly:
When disassembling the original Grip2 dials, beware of the small sprung ball bearings.
- Loosen the retaining bolt for the damper dials and carefully remove them.
- Remove them and the underlying springs using a small needle or nail, don't lose them!
- Transplant the springs into the corresponding holes in the model.
- Using a screw driver or similar pack the springs/holes with plenty of grease, this is needed to ‘stick’ the ball bearings into the holes for installation.
- Insert the bearings and carefully place the LSC/HSC stack into the bike. Rotate until the dials bottom out on the damper.
Enjoy your pimped out bike!
Edit: I have modified the GripX dial to more closely match the official version