Garden Hose Washer/Gasket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiple models for Washer or Gasket for garden hose as a 12-piece line card or as a single washer
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 427
- Wydruki
- 6
- Wyświetlenia
- 1017
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These models are for a washer or gasket for a garden hose. I've included 4 models. One is a line card with 12 breakaway or cutaway washers with retention tabs. The second is identical to the first however without the retention tabs. The third is a single washer with retention tabs. The last is a single washer without retention tabs.
These are to be printed in TPU. I recommend 0.2mm layer height and 3 Top and 3 Bottom layers with Concentric Surface Pattern. Concentric Surface Pattern reduces sneak paths for water to leak providing a better seal. I also recommend 20% infill. More surface layers and/or a higher infill percentage will make the washer more stiff. Conversely, reducing either or both will make the washer more soft or squishy. Adjust as needed for your application.
I made these 3.1mm (1/8 inch) thick. If you need a thicker or thinner washer you can adjust the z-axis scaling in your Slicer.