Garden Hose Washer/Gasket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multiple models for Washer or Gasket for garden hose as a 12-piece line card or as a single washer
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 427
- Makes
- 6
- Views
- 1,017
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These models are for a washer or gasket for a garden hose. I've included 4 models. One is a line card with 12 breakaway or cutaway washers with retention tabs. The second is identical to the first however without the retention tabs. The third is a single washer with retention tabs. The last is a single washer without retention tabs.
These are to be printed in TPU. I recommend 0.2mm layer height and 3 Top and 3 Bottom layers with Concentric Surface Pattern. Concentric Surface Pattern reduces sneak paths for water to leak providing a better seal. I also recommend 20% infill. More surface layers and/or a higher infill percentage will make the washer more stiff. Conversely, reducing either or both will make the washer more soft or squishy. Adjust as needed for your application.
I made these 3.1mm (1/8 inch) thick. If you need a thicker or thinner washer you can adjust the z-axis scaling in your Slicer.