Search results: washers

Counting matching models…

Washers narrow series

each print file will give you 30 washers in one print of the desire diameter.

Downloads: 8
Likes: 0
Rating: 0

Printables

Prusa XL modified Left and Right Y-Carriage for Toothed Idlers Pulleys with 10mm width (for new O-Rings / Washers)

Hello XL makers! This is a Remix for the Prusa XL Y-Carriage for toothed Idler Pulleys with a width of 10mm. I have written a detailed article about this, which deals with Gates' manufacturer recommendations:…

Order a print of this model

Printables

Locknuts, Blanking Plugs, Bushing and Washers

A collection of blanking plugs, bushing, locknuts and washers. Blanking Plugs: for blocking off holes in metal trunking, panels or equipment racks. Plain circular with screwdriver slots (BPP) or hexagonal (BPH). Bushing: for routing a…

Order a print of this model

Printables

Stabilizing Washers for Stackable Filament Rack

This adapter is made for a ¾" (19mm) wooden dowel, fitting into 22mm Stackable Filament Rack brackets. When the adapter is screwed or glued onto the dowel, it prevents the dowel from slipping out of the bracket. Adaptations for other size…

Order a print of this model

Printables

Complete Set of Metric Washers DIN 125 Form A M1.6 up to M64

Metric washers according to DIN 125 Form A. This model has been requested by Fsh.

Order a print of this model

Printables

Complete Set of Bevelled Metric Washers DIN 125 Form B M1.6 up to M64

Metric washers with one-side bevel according to DIN 125 Form B. This model has been requested by Fsh.

Order a print of this model

Printables

TPU Washers for Lavatory Faucet Mounting Bolts (SCAD)

These were made for use with lavatory faucets -- primarily bolt-on single handle faucets with integral supply lines. They slip over the supply line and bolt and act as a compliant washer under the clamping plate. The effect is a more…

Order a print of this model

Printables

Modular Hardware Storage Drawers (Nuts, Bolts & Washers) + Label Plates

Files Included Container / module body Sliding drawer Label plate Printing Notes Designed to print support-free in common orientations. Recommended materials: PLA or PETG Suggested settings: 0.20 mm layer height , 3 walls , 10–20% infill…

Order a print of this model

Printables

Offline Crypto Wallet Backup on Stainless Steel Washers - 3mm Stamping Jig

Paper backups fail. Ink fades. Hardware wallets break. This 3mm stamping jig is designed to help you create a durable, offline backup of a 12–24 word crypto seed phrase (or any critical secret) by stamping directly into stainless steel…

Order a print of this model

Printables

Short Wheel Mount for Zanussi Dishwashers

A shorter remix of this great design for Zanussi, AEG, Zanker, Electrolux, etc...

Order a print of this model

Printables

Washers

washers in 3 sizes. • small washer = outer diameter 13mm, inner diameter 6mm. • medium washer = outer diameter 21mm, inner diameter 8mm. • big washer = outer diameter 25mm, inner diameter 10mm. note: print in ABS or other hi strength…

Order a print of this model

Printables

Washers

Various size washers to go with your bolts. #6 SAE #8 SAE #10 SAE 1/4" USS 5/16" USS 3/8" USS 7/16" USS 1/2" USS

Order a print of this model

Printables

Washers narrow series

each print file will give you 30 washers in one print of the desire diameter.

Order a print of this model

Printables

Washers normal series

each print file will give you 30 washers in one print of the desire diameter.

Order a print of this model

Printables

Washers large series

each print file will give you 30 washers in one print of the desire diameter.

Order a print of this model

Printables

Toilet seat tool with washers (Improved - V2)

I wasn't sure about the size of toilet seat wingnuts to I've oversized the fitment to hopefully cover a wide range of them. Print with at least 3 walls and 20% infil. And remember its' not metal, don't over crank this tool. You will need…

Order a print of this model

Printables

Custom washers - arandelas

Arandelas por medida-Custom washers 1/4, 5/16, 3/8, 7/16, 1/2, thickness 2,5mm. Talvez haya que modificar el parámetro de pata de elefante a 0,2mm. Perhaps the elephant foot parameter needs to be modified to 0.2mm.

Order a print of this model

Printables

Custom washers - arandelas

Arandelas por medida-Custom washers 3mm, 4mm, 5mm, 6mm, 7mm, thickness 1,5mm. Talvez haya que modificar el parámetro de pata de elefante a 0,2mm. Perhaps the elephant foot parameter needs to be modified to 0.2mm.

Order a print of this model

Printables

Custom washers - arandelas

Arandelas por medida-Custom washers 9/16, 5/8, 3/4, 7/8, 1 thickness 3mm. Talvez haya que modificar el parámetro de pata de elefante a 0,2mm. Perhaps the elephant foot parameter needs to be modified to 0.2mm.

Order a print of this model

Printables

Dielectric Washers and Gaskets

Great for separating titanium screws from aluminum and stainless steel surfaces. Requires minimum material, doesn't stick out from underneath the cap, doesn't add too much elevation to the screw. Can be used as regular washers if scaled…

Order a print of this model

Printables

Spacesaving Gridfinity 5(9)x1 container for M2 and M3 screws, nuts, washers and locks

This is a collection of 5x1 gridfinity base sizes with 9 seperate spaces for M2/M3 screws, nuts, washers and locks. Each unit fits at least 40 pieces - but can go up to 150 (depending on categroy). The STL models are included to either do…

Order a print of this model

Printables

Captive C washers DIN 6371 - Clamping Cam - Rondelle a perno DIN 6371

Clamping Cam - Captive C washers DIN 6371 - Rondelle a perno con vite testa piana 38x29x9.8mm M6x10mm 61x45x11.8mm M8x12mm Resize/Scale to adjust dimension If you download/enjoyed this file, I always appreciate a like - Thx

Order a print of this model

Printables

DJControl Inpulse T7 Backspin Washers

Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.1 mm (Quality) Infill 15% No support needed Materials recommended: PLA Printer used for prototyping: Prusa XL Type of bed used for prototyping: smooth All…

Order a print of this model

Printables

TrackTwist - Metric Hex Sockets Washers

Printed at 0.2mm layer height added colour change for layers 6-8 to fill in labels on washers.

Order a print of this model

Printables

Sieve/sorter for washers

Dropped a box of abt 900 washers on the floor. Manually re-sorting was not fun at all, so I printed these simple sorters. There are six sizes of washers in the box, so I needed 5 sieves. The file name describes the hole size in the step…

Order a print of this model

Printables

Washers - Butterfly Knife Toy

Some washers designed to fit either side of the blade for a better fit, but still thin enough not to cause problems. Download the main butterfly knife parts here: https://www.printables.com/model/590041-butterfly-knife-trainer-toy…

Order a print of this model

Printables

Version of base that supports 3/4in washers for US.

For more common washers in the US. Use 'USS' type washers with 2in OD avail at big box stores, not the smaller 'SAE'.

Order a print of this model

Printables

SMA washers

I was tired of trying to remove the locking washers that usually come with SMA connectors, so I made these plastic washers to repace them, which also protect the case from scratching.

Order a print of this model

Printables

Cadet Pedals Bearing Washers

I simply made these to help with the assembly of the Cadet Rudder Pedals. The washers lift the bearings slightly to ease movement and keeps the other printed arms from rubbing against one another. Simply print two Bearing Spacers With…

Order a print of this model

Printables

Prusa XL modified CoreXY parts for new O-rings or Washers with LDO Idler Pulleys 10mm

Hello XL makers! This i a Remix of a few Remixes :D Thanks to all of them <3 Lukáš Kupec , sshyshak , Racemade3D , racerethan , Prusa Research This remix was made for pulleys from LDO or Gates that have a thickness of 10mm. The original…

Order a print of this model

Printables

Prusa XL modified Left and Right Y-Carriage for Toothed Idlers Pulleys with 10mm width (for new O-Rings / Washers)

Order a print of this model

Printables

Ender 3 V3 SE washers spacers

Ender 3 V3 SE / KE has an issue with leveling bed because of a lack of an elevation screw. Because of that, the printer has problems with auto-leveling and printing quality. With these small washers, you can raise the corner of the…

Order a print of this model

Printables

STL Hardware Parts - Nuts, Bolts & Washers

A small selection of the 25k+ nuts , bolts and washers STL Hardware Parts have in their library. They also fit onto standard nuts & bolts perfectly. Recommend printing at 0.12mm. M10 Washer M10 Round Head Cap Bolt - Thread Pitch 1.5mm M10…

Order a print of this model

Printables

Qwashers

This game is a combination of Quarters and Washers. Rules can be found here: http://tinyurl.com/qwashers This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5Sp6tosJgcJ Category: 3D Printing

Order a print of this model

Printables

Stackable sewing pattern weights with inserted washers - 250g

Reworked for more weight. 7 washers option. 0,2mm layer height, 3 perimeters, 5 top and bottom layers. Pause at layer 103 to insert washers. 250g total weight. Used washers: M14, DIN 9021

Order a print of this model

Printables

Updated 16mm Bolt with 2 Nuts and 2 washers

This is a remix of my original nut and bolt. I increased the spline segments to make them smoother and opened up the thread diameter in the nut to make it a little bigger and thus easier to work. I doubled the nuts so there are now 2 and…

Order a print of this model

Printables

STL Hardware Parts - Imperial Nuts Bolts & Washers

Description A small imperial selection of the 25k+ nuts , bolts and washers STL Hardware Parts have in their library. They also fit onto standard nuts & bolts perfectly. Recommend printing at 0.12mm. Brim should be used if you have bed…

Order a print of this model

Printables

Washers for Spools With Larger holes

I created washers for spools with larger holes so that I could use the original print on SunLu Spools These are the washers only. Please print the original model ( Adjustable Spool Holder for Silica Gel / Spool Weight) to complete the…

Order a print of this model

Printables

TrackTwist washers with white text

Changed filament a few layers into the print to achieve a white background and colored front of the washers.

Order a print of this model

Printables

Flush Printed Washers for 1/2", 3/8", and 1/4" drives both SAE and Metric

1-4 Washers.3mf contains full set of metric and SAE washers for smaller shaft twist nuts for ¼" drive sockets. 3-8 Washers.3mf contains full set of metric and SAE washers for larger shaft twist nuts for 3/8" and ½" sockets plus there are…

Order a print of this model

Printables

Sealrings / washers

Sealrings for washers if printed with a flexible filament. Washers if printed with a hard filament. Sizes: Name > outer diameter >inner diameter All 1.5mm thick I know they are made fast and easy, but downloading might be easier and…

Order a print of this model

Printables

Landy splash guards washers and spacer

When you have splash guards from TPU, they are better with washers. Fits 3Dsets Landy and Landy Wagon. For wagon use the spacer piece, it looks more relastic, its closer to the wheel and not directly at the end of the car. Mirror for…

Order a print of this model

Printables

ISO 7089 Washers M1.6 - M64

Order a print of this model

Printables

ISO 7090 Washers M5 - M64

Order a print of this model

Printables

Functional Washers for PETG/ASA – Various Sizes – LR Basics

This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…

Order a print of this model

Printables

ISO 7092 Washers M1.6 - M36

ISO 7092 Washers

Order a print of this model

Printables

Injection Nozzle Rack Supports for Steelco LAB 500L Washers

These are replacement parts for our Steelco Lab 500L glassware dishwasher, commonly used in scientific labs for cleaning glassware. We tested PETG, but it's not temperature resistant enough. Resin printing was also tested, but the parts…

Order a print of this model

Printables

ISO 7093 Washers M3 - M30

Washers

Order a print of this model

Printables

ISO 7094 Washers M5 - M33

Washers

Order a print of this model

Printables

ISO 8738 Washers M3 - M32

Washers

Order a print of this model

Printables

nfe27 619 Washers M3 - M14

Washers

Order a print of this model

Printables

Torx Flush Washers - For TrackTwist

I like the look of the flush 2 colors and made these for a torx set i was looking to org. half are 1-4 16.5mm and the others are 33mm 3-8

Order a print of this model

Printables

All Flush Washers - TwistLock

I like the flush two color look. The sets I have are the sets I use, if you have anything specific, send me a message and ill try to make additional. set includes: SAE, Metric, adapters/ Union joint sockets, spark plug socket, Torx, and…

Order a print of this model

Printables

RatRig X End Stop Cap and Washers for Funssor/Blurolls XY Joints

The end stop cap compression fits into the square hole to allow for the X end stop to activate. I added the washers to match my colour scheme as the red didn't match with anything on the printer. Link to the Funssor Ratrig V-core4 3D…

Order a print of this model

Printables

DIN 6340 Washers M6 - M30

DIN 6340 Washers

Order a print of this model

Printables

DIN 6319 G Washers M6 - M30

DIN 6319 G

Order a print of this model

Printables

DIN 6319 D Washers M6 - M30

DIN 6319 D

Order a print of this model

Printables

DIN 6319 C Washers M6 - M30

DIN 6319 C

Order a print of this model

Printables

washers / Unterlegscheiben (DIN EN ISO 7092)

Washers to DIN EN ISO 7092 with medium through-hole. For M1.6 ; M2 ; M2.5 ; M3 ; M4 ; M5 ; M6 ; M8 ; M10 ; M12 ; M16 ; M20 ; M24 For the smaller washers up to M3, I recommend a smaller nozzle (smaller than Ø0.4). Unterlegscheiben nach DIN…

Order a print of this model

Printables

Gridfinity Bin Labels Multicolor UNC Flat Washers #4-40 #6-32 #8-32 #10-24

This model is based on the fantastic Gridfinity Bin with Printable Label by Pred . This has quickly become my go-to bin for organizing my hardware. The labels provided by Pred in the original model are a single object. You can print them…

Order a print of this model

Printables

Gridfinity Bin Labels Multicolor UNC Split Washers #4 #6 #8 #10 #12

Order a print of this model

Printables

Massive Washers Collection

Hope this helps somebody out took a long time to make so if you can I would greatly apreciate a like, download or both thank you! If your slicer asks you to recalculate the object select the option NO.

Order a print of this model

Printables

Prusa XL modified CoreXY parts for new O-rings or Washers with smaller Pulley holes

Hello XL makers! This i a Remix of a few Remixes :D Thanks to all of them <3 Lukáš Kupec , sshyshak , Racemade3D , Prusa Research I offer another special option here. I changed the parts slightly regarding the hole for the pulley axles. I…

Order a print of this model

Printables

Dodge Ram - 3rd Gen - Roof Marker Light Washers

Washers to replace broken nylon washers on Dodge Ram 3rd gen roof marker lights. Printed in PETG.

Order a print of this model

Printables

Customizabel IKEA Samla 22l Spool Stand --- No rod, bearing, washers, nuts .....

Update: Die “Mutter/Nuss” oben wurde geöffnet, damit die Sechseck-Stangen direkt eingehängt werden können. Somit können die Spulen direkt rein und raus genommen werden. Hallo, hier ein veränderbares Modell für die IKEA Samla 22l Box. (Ich…

Order a print of this model

Printables

Even More MASSIVE Washers Collection 2

🔩 Washers Collection 2 – Imperial & Metric Sizes 🔧 I greatly appreciate every like, comment and download! 🛠 A versatile set of printable flat washers designed for various bolt sizes . Perfect for DIY projects , mechanical mockups , and…

Order a print of this model

Printables

U-Shaped Washers (Spacers) for ND Miata Trunk Lid Popper from MX5things

A couple of years ago I purchased the MX5things Trunk Lid Popper mod for my ND Miata. I recently noticed the trunk lid did not sit flush, and that MX5things sells U-shaped washers to solve the issue. Via email, Sergey said that any 0.05"…

Order a print of this model

Printables

Cheese for Code and Go Mouse with Washers

Printed on Creality K1 Max. I pause before the print before it finishes so I can add washers. I was able to fit 9 washers. 3 washers on each side. The washer will make the mouse stop. The washers that I used are 1/8 inch X 1 inch zinc…

Order a print of this model

Printables

Locknuts, Blanking Plugs, Bushing and Washers

Order a print of this model

Printables

Toolless motherboard standoffs with clip-on retaining washers

ATX motherboard standoffs with clip-on washers for a semi-secure fit. Raises the motherboard ~9.5mm off the ground. Useful for tinkering where you need easy access to the components. I made these standoffs while designing a 10 inch rack…

Order a print of this model

Printables

Gridfinity Bin Labels: Hex Nuts & Washers for 1x1x6_D2_L12_S10

Pretty much nothing to explain here. — Custom size — Fusion files are available in zip. ↪ “Small text” version has a height of 3.5 (useful for decimals) while “Big text” has 4.5. Edit text, then extrude 0.4mm and you're ready to print. —…

Order a print of this model

Printables

Anti Vibration Foot Pad Isolator Rubber Bumper for Air Compressors, Generators, Pressure Washers

I needed a pair for my DeWalt air Compressor, I had a spool of TPU so I made one. Printed it 40% infill Here are the settings I used : Printing speed = 30mm/s Travel Speed = 200mm/s Nozzle = 215°C, bed 30°C Retract = 2.8mm Retract Speed =…

Order a print of this model

Printables

Washers for Simagic P500 with P-ORP(H) springs.

Order a print of this model

Printables

Low-profile wheels/rollers for Midea SF 5.45NW10C dishwashers

Updates 07/2025: Made the rollers and clips slightly deeper to avoid occasional slips from the rail (clip v1.9/roller v1.5). Description Modified wheels/rollers for Midea SF 5.45NW10C dishwashers to increase the clearance between the…

Order a print of this model

Printables

keypad panel designed specifically for Zerowatt dishwashers

This 3D-printable panel is an ideal solution for owners of older Zerowatt dishwashers, DIY repair enthusiasts, or technicians looking to extend the life of discontinued appliances. By printing this model, you can overcome the challenge of…

Order a print of this model

Printables

ABS Replacement Dishwasher Tray Wheel for KitchenAid, Other Washers

I designed this wheel and pin as a direct replacement for the lower tray wheel on my Kitchenaid washer. This part MUST be printed in ABS or a similarly heat resistant filament, or it will deform and melt from the hea inside the washer.…

Order a print of this model

Printables

Prusa XL Core XY Rework / Optimization (for new O-Rings / Washers)

Preface: Since the beginning my XL was troubled with many problems that also included severe VFA's (you could even feel the ripples), unequal belt tension or misaligned x-carriage and unable to calibrate IS as either one or the other belt…

Order a print of this model

Printables

M8 Washers for TV VESA Mount Profile Channel - Samsung

My model, and many models of Samsung TVs, use a M8 x 1.25mm pitch screw with varying lengths. I needed a 43-45mm screw, but those were difficult to find. Use this 4.8mm tall washer to use 50mm screws. I suggest using PETG or another…

Order a print of this model

Printables

Bearing Standoff Washers for adding smooth articulation to moving parts - Parametric

I recently purchased a lawnmower blade sharpening jig from amazon. The arms of this jig are overlapped joints secured with screws, spacers and washers. There are no bearings and it's impossible to have a tight joint that still moves…

Order a print of this model

Printables

Standard Drum Set Tension Rod Washers/Spacers

Tension Rod washers. These are universal and can be used on any drum, providing there is enough length to the tension rod to allow for them.

Order a print of this model

Printables

Pearl-Style Drum Set Tension Rod Washers / Spacers

Tension Rod washers. These are modeled after the thinner, wider Pearl-style washers, but they are universal and can be used on any drum, providing there is enough length to the tension rod to allow for them.

Order a print of this model

Printables

Washers -- Any Size

Here is a very simple OpenSCAD source file to create washers of any size. There are three variables at the top (outer and inner diameter, and thickness) change them to suit your needs. Printed at 100% infill the washers are surprisingly…

Order a print of this model

Printables

M6 cage nut washers

I bought some M6 cage nuts and bolts and they didn't come with any washers, usually with rackmount kit you get those deep washers that cover the sides of the bolts - well this is them! I also included some regular washers. Fusion 360…

Order a print of this model

Printables

Stabilizing Washers for Stackable Filament Rack

Order a print of this model

Printables

Land Rover Discovery 1 Spare Wheel Washers

On my Land Rover Discovery the wheel nuts don't fully lock down the spare wheel, allowing it to move slightly. These washers fit under the nut and keep it steady. Dimensions OD: 38mm, ID: 30mm, thickness: 5mm Under no circumstances use…

Order a print of this model

Printables

Complete Set of Metric Washers DIN 125 Form A M1.6 up to M64

Metric washers according to DIN 125 Form A. This model has been requested by Fsh.

Order a print of this model

Printables

Complete Set of Bevelled Metric Washers DIN 125 Form B M1.6 up to M64

Metric washers with one-side bevel according to DIN 125 Form B. This model has been requested by Fsh.

Order a print of this model

Printables

Backer Board Washers

Washer for backer boards, images shown tested on GoBoard. PETG, ASA or Nylon recommended. For maximum strength, print with 100% infill. I needed 24 washers for a project, but home improvement stores only sold them in massive boxes of 180…

Order a print of this model

Printables

Surly OD washers

Context Surly sells these washers QR option is designed to adapt any 135, 141, 170, or 190mm O.L.D. QR axle hub to work with a 142, 148, 177, or 197mm spaced thru-axle Surly frames only 10mm Axle option is designed to adapt any 135, 141,…

Order a print of this model

Printables

TrackTwist Washers - Triple Square (M4-M18) and Hex (H3-12)

I used the blanks to add some (M, and H) washers for triple-squares and Hex set from Harbor Freight. Just added some more options for washers. All the other stuff can be found at the original designer. Cheers.

Order a print of this model

Printables

Tripod Claw Foot Holder, Washers and Covers

I wanted a means of safely storing the claw feet for my tripod when travelling with them and the tripod in a suitcase. also wanted to make sure that the bottom of each leg was a water tight as possible when fitted with the Selens FT-01…

Order a print of this model

Printables

Ender 3 Bed Washers

Layer height: 0.16

Order a print of this model

Printables

TrackTwist - TX Washers 285mm and 225mm

There was only a T and my autistic brain can't handle that. So now I've made TX Color change on layer 6

Order a print of this model

Printables

TPU Washers for Lavatory Faucet Mounting Bolts (SCAD)

Order a print of this model

Printables

Modular Hardware Storage Drawers (Nuts, Bolts & Washers) + Label Plates

Order a print of this model

Printables

Offline Crypto Wallet Backup on Stainless Steel Washers - 3mm Stamping Jig

Order a print of this model

Printables

Dishwashers cutlery basket repair

Just make it in dimensions what you need and "delete"/set bottom and top layers to 0 and choose the infill of your liking. Print settings: 3 walls, 0 bottom, 0 top, honeycomb 15% Use PETG or ABS!! PLA is really bad for water and those…

Order a print of this model

Printables

Rev Grip Tuning Washers

Some tuning washers for the race and pro versions of their grips, wanted to try these out before spending on theirs. as described on their website, 0.01 and 0.02 thickness washers. recommend you print these on a smooth plate hence why I…

Order a print of this model

Printables

Stamping Jig for M14x28x1.5 Brass Sealing Washers

Washer stamping jig specifically for M14x28x1.5 brass sealing washers. Jig utilizes a 3mm centering hole that can be drilled into the washer using the included drilling jig. The hole precludes using 2 spaces. This no-stamp zone is…

Order a print of this model

Printables

Short Wheel Mount for Zanussi Dishwashers

A shorter remix of this great design for Zanussi, AEG, Zanker, Electrolux, etc...

Order a print of this model