M3 Washers & Spacers – 10–20 mm Diameter, 1–5 mm Thickness
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
M3 washers with a 3.2 mm hole, outer diameters from 10 to 20 mm and thicknesses from 1 to 5 mm. Easily adjust the thickn
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 85
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
A set of 3D printable M3 washers and spacers for DIY projects, assembly and gap adjustment. Choose the outer diameter and thickness that suit your project.
Dimensions
Inner diameter: 3.2 mm
Outer diameters: 10–20 mm
Available thicknesses: 1, 2, 3, 4 and 5 mm
Custom thickness
To set a custom thickness, disable uniform scaling in your slicer and change only the model’s Z dimension to your desired value. This preserves both the inner and outer diameters.
For example, set the Z dimension to 2.5 mm to create a 2.5 mm thick washer. Choose a layer height that allows the desired thickness to be printed.
Suggested print settings
Print flat on the build plate
No supports required
100% infill
Printed hole dimensions may vary depending on your printer and material, so check the fit before assembly.