1 / 1
M3 Washers & Spacers – 10–20 mm Diameter, 1–5 mm Thickness — zdjęcie 1

M3 Washers & Spacers – 10–20 mm Diameter, 1–5 mm Thickness

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

M3 washers with a 3.2 mm hole, outer diameters from 10 to 20 mm and thicknesses from 1 to 5 mm. Easily adjust the thickn

Ocena
0 / 5
Polubienia
23
Pobrania
85
Wydruki
0
Wyświetlenia
182
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

A set of 3D printable M3 washers and spacers for DIY projects, assembly and gap adjustment. Choose the outer diameter and thickness that suit your project.

Dimensions

  • Inner diameter: 3.2 mm

  • Outer diameters: 10–20 mm

  • Available thicknesses: 1, 2, 3, 4 and 5 mm

Custom thickness

To set a custom thickness, disable uniform scaling in your slicer and change only the model’s Z dimension to your desired value. This preserves both the inner and outer diameters.

For example, set the Z dimension to 2.5 mm to create a 2.5 mm thick washer. Choose a layer height that allows the desired thickness to be printed.

Suggested print settings

  • Print flat on the build plate

  • No supports required

  • 100% infill

Printed hole dimensions may vary depending on your printer and material, so check the fit before assembly.

Tagi