Voron MiniSB V6 Mount

V6 Mount for Mini Stealthburner

Features

• E3D V6 style mount in 2 parts.
• Available in both normal mount & fan-saver mount type.
• Easily holds together using screws (and heat insert nuts)

Important Note:

Please be informed that due to the length of V6 hotends, this mount is slightly longer than dragon mounts.

Assembly Instruction

Print Instruction:

• Support not required for both part (support already inbuilt in mount_1, no support required for mount_2)
• Required to adjust orientation before print (sorry)
• Recommended print setting:
  • ABS / PETG
  • 40% infill
  • Wall count: 3
  • Top / Bottom later: Minimum 4

Parts Required:

• [Printed Part] mount_1 x 1
• [Printed Part] mount_2 x 1
• Heat Insert Nut (M3 x 4 x 5, similar to Voron's spec) x 2
• M3 x 18 BHCS Screw x 2

Assembly

• Remove the 2 support parts from mount_1.
• Insert 2 heat insert nuts into mount_2.

• Grab your V6 hotend, clip it between the mount_1 and mount_2.

• Secure the M3 x 18 screw from mount_1 side.

• Install the hotend into mini stealthburner, and you're done!

Note: CAD file is available, feel free to mod it to your need.

Update 13 April 2024: Updated distance between support and mount_1, originally it is too tight that it fused together .