HSW 2 x Loctite Super Glue holder (Direct Mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Super glue tray for Honeycomb Wall Storage
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 119
- Wydruki
- 1
- Wyświetlenia
- 406
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
I’ve created a Loctite Super Glue holder for HSW. This design is different because it can be directly attached to your Honeycomb Storage Wall. I prefer designs that don’t require extra parts for mounting. If you print this design with the right tolerance, it will fit tightly and won’t easily fall off. In fact, it might fit so tightly that you’d need to use some force to remove it.
There are several files available for this model, each with different tolerances. Before you decide which one to print, please check another one of my designs to determine the tolerance you prefer. HSW Direct Mount Tolerance Check by Dmitri K | Download free STL model | Printables.com
I personally find that a tolerance of 19.85mm (the height of the hexagon from the build plate) works best for me. So, I only print the 19.85 version. However, your printer might not be able to print with the same tolerance, as it only leaves a 0.15mm gap from the 20mm high hexagon hole in the wall. Therefore, I strongly recommend that you first print the STLs from the link above and then choose one of the designs in the files section here to print.
Infill 15%
No supports needed
PLA or PETG (I Printed in PLA)
Internal storage is 43mm in width and 54.8 in depth. Internal height of 18mm. Might be suitable for other purposes.