Bed Leveling Wheel Enlarging Ring - Artillery Sidewinder X1 / X2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bed leveling knobs on the Sidewinder X1 and X2 are too small! Use these enlargement rings to make them easier to reach.
- Ocena
- 4,833 / 5
- Polubienia
- 45
- Pobrania
- 318
- Wydruki
- 10
- Wyświetlenia
- 1202
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
If you find this thing useful, please consider sending a tip. Thanks!
https://paypal.me/cdsmakestuff
Easy Upgrade for the Artillery Sidewinder X1...
For the size of the bed, the leveling wheels on the ASWX1 are tiny... My CE3Pro has larger leveling wheels. No more... Easy print, easy install.
A good press fit over the existing leveling wheels. I suggest removing the leveling wheels for installation. Glue may not be necessary, but I put a few drops of CA on mine.
TIP: If your print is too big or too small to fit the leveling wheels properly... Adjust the size (scale) in your slicer accordingly.
See the photo for size comparison... from 50mm to 80mm!
Enjoy!
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
No
No
Resolution:
medium - .20mm
10-15
Filament: any PLA any
Notes:
4 walls - 4-5 top / bottom layers
Category: 3D Printer Accessories