1 / 3
Minimalist Rod Holder for 1" Round Tube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple minimalist screw mounted holder for 1" diameter tube/rod.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 138
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (14)Powiązane
Simple minimalist screw mounted holder for 1" diameter tube/rod. I made two versions, one with a flat bottom for pan screw heads, and other with countersink holes for countersink head screws.
They can be use for shower curtain tubes, wardrobe hangers or where your imagination takes you.
I printed mine at:
- 80% infill.
- 0.20mm (Structural).
- Nozzle diameter 0.4 mm
- NO SUPPORTS
- PETG (But I guess any other filament like PLA, ABS OR ASA should work as fine or better :)