KitchenAid Food Grinder Attachment Retaining Ring / Nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you find this useful, please consider sending a tip. Thanks!https://paypal.me/cdsmakestuff Retaining ring / nut for…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 221
- Wydruki
- 2
- Wyświetlenia
- 978
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
If you find this useful, please consider sending a tip. Thanks!
https://paypal.me/cdsmakestuff
Retaining ring / nut for KitchenAid stand mixer attachment, Food Grinder (FGA-2).
Depending on the tolerances of your printer, it may be necessary to increase the size by a few percent... the threads work great but can get a tight towards the end of the travel.
Printed in PLA, but PETG might be a better choice.
Be advised that while PLA and PETG are both "food safe" plastics, it is the method of manufacturing (FDM printing), that may not be because of microscopic pores in the surface that food or bacteria could be become lodged.
Use at your own risk and judgement.
Reminder: PLA is NOT a dishwasher safe plastic.
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
No
No
Resolution:
medium
40
Filament: any PLA, PETG any / white
Category: Replacement Parts