PicassoTiles Ramp Track
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ramp track to extend your PicassoTiles race track set and take it to the next level (pun intended)
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 185
- Wydruki
- 1
- Wyświetlenia
- 1035
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Works with the PicassoTiles race track set. This track piece will fit on the normal support towers and stay in place using the little pins that hold it together with no issues. However, laying this track on the floor will require clips to hold the pieces together (see photos). This is because the normal pieces have magnets in them to hold them together.
Print a few of these clips to keep the track together: https://www.printables.com/model/839399-picassotiles-track-clips
This track printed fine at 10% gyroid infill and is still remarkably strong to hold up to little kids' play. This was designed to be printed completely flat on the bed, but there is a small portion at the top of the ramp that requires supports (see photos). Organic supports worked the best for me and separated the cleanest. Unnecessary material has been removed so the print time is reduced.