Print bed plate holder - modular
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holders for your printing sheets that can be expanded to the amount you need.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 457
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Unfortunately, I couldn't find a suitable pressure bed plate holder for me, as the required number of places wasn't right for me, so I made my own, which can be extended again and again as required.
There is a holder for M4 screw nuts on the back. With a suitable length of M4 screw, as many as required can then be joined together.
As each individual holder can have a different colour, life becomes a little more colourful - if you want it to be.
No supports needed (nut holes are designed to be printed without)
Hardware needed:
3x M4 nut
3x M4 Screw - lenght depending on amount of slots. (8mm per slot + 5mm for endblade)
I added a 15cm and a 20cm base-lenght version for different plate sizes.