Print bed plate holder - modular
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holders for your printing sheets that can be expanded to the amount you need.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 44
- Makes
- 0
- Views
- 457
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Unfortunately, I couldn't find a suitable pressure bed plate holder for me, as the required number of places wasn't right for me, so I made my own, which can be extended again and again as required.
There is a holder for M4 screw nuts on the back. With a suitable length of M4 screw, as many as required can then be joined together.
As each individual holder can have a different colour, life becomes a little more colourful - if you want it to be.
No supports needed (nut holes are designed to be printed without)
Hardware needed:
3x M4 nut
3x M4 Screw - lenght depending on amount of slots. (8mm per slot + 5mm for endblade)
I added a 15cm and a 20cm base-lenght version for different plate sizes.