Counting matching models…
I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
Sliced the model to fit the printbed of 18x18x18cm. Remember to print the pin horizontally on the bed, otherwise it will be too weak and snap easily.
A printbed scraper that works better than most of the other models! It is a little bit sharper than most scrapers making it work much better. supports: yes I recently updated it making the handle slightly longer. Check out my updated…
About the Scrapers: With a length of 86 mm and a thickness of 5 mm, the scrapers are very compact. The grooves on the side of the handle provide a firm grip. The angle of the front wedge is 26.6° and is therefore quite robust. Of course…
04-01-'24 Edit added at the bottom! This is an adapted version of my other drawer box set . This adaptation makes it possible to print on a Bambulabs printer. This boxset is 230x230x97mm To make printing easier I have, where neccesary,…
This is a Remix of the 1/30 Outer Shoulder from BobC_3d optimized for printing diagonal on a 180x180mm printer like a Prusa Mini. https://www.thingiverse.com/thing:4340764 The original was a little to large for the printbed, so I decided…
This is a remix of Jewelry Holder made especially for necklaces. Please do first appreciate and like the original model from the author of this stand ( @DanielSchenk_545468 ) then you can like my! I strongly recommend using the .3mf file…
Print bed scraper with dedicated place for magnet 6mm x 3 mm. On the picture made of PLA 20% infill PL Skrobak do stołu drukarki 3D - w moim przypadku PRUSA MK3 Skrobak z miejscem na magnes - pasuje na wcisk magnes 6x3mm U mnie druk z PLA…
This is a collection of spacers for 3d printing bed springs and silicon dumpers to raise the bed up to 1 cm.
I remixed this lovely looking 3-record hanger so I could print it on my wee A1 mini. I have removed the middle rack and boolean merged the top and bottom. Handy if you need a smaller one, but should now fit onto most “mini” build plates…
I printed mine with a .4 nozzle at .12 height and 100% infill. Worked out amazing and took about an hour. Used ABS to ensure durability.
I really struggled to find anything easier and functional than over complicated and bulky solutions, so I ended designing this. This is not a final design so please if you notice any problem or you have suggestions on how to improve it…
The bedscraper is designed in two sizes, 50mm and 55mm, both featuring a slightly ergonomic shape for comfortable use. It is made from only 23 grams of filament and includes a 5mm hole for easy hanging and storage. Print settings…
every maker prints a scraper! this is my version of a good working and handy printbed scraper and you wouldn't believe it, it also is easy to print ;) I sharpen it from time to time with 400 grain sandpaper 4 variants: 50mm 66mm 83mm…
The tube is a modified version of the original model, achieved through a cutting process. This adjustment does not involve moving any holes from the original configuration. A diameter of 190 mm was selected to suit the specifications of…
This printbed leveling tool can help you have the right distance from your nozzel to your printbed. Put it between the nozzel and the printbed until you fell a little resistance; that is the correct height. This model was printed in PLA…
I made this tool so that it is easier to remove your printed piece. The random design ensures fast print times. No supports are needed. Durable design. Fits comfortably in hand. Made it so you don't have to use a hobby knife or anything…
Sliced the model to fit the printbed of 18x18x18cm. Remember to print the pin horizontally on the bed, otherwise it will be too weak and snap easily.
Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge sharp enough to slide under your prints.
A printbed scraper that works better than most of the other models! It is a little bit sharper than most scrapers making it work much better. supports: yes I recently updated it making the handle slightly longer. Check out my updated…
A holder for two Printbeds, of a thickness of up to 2mm, Easy and fast print, low footprint, Its 72mm long. If you need a customized/customizable version let me know :-) I use it with the 310x310 Printbeds of the k1 max. It works.
Simple, easy to use, easy blade-swopping printbed scraper. Works with https://www.amazon.com/dp/B0B9787XVT?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4
Created this cover for my printbed so it stays clean during production pauses or for longer breaks, where visitors might touch the plate. Just home the printer, slide the cover on, finished! So easy :) Its printable on the Bambulab A1,…
PLA print, abt. 40min, 11g (for the scraper itself) abt. 10min, 4g (for the replacement tip) supports recommended
I designed this printbed scraper to provide a simple and effective tool for safely removing 3D prints from the build plate1. The model features a flat, wide blade and an ergonomic handle, making it easy to slide under prints without…
a tool for removing 3D models from the Ender-3 v3 KE workbench
Simple mold to make silicone dampers for your heatbed instead of springs. I did use 2 component duplicate silicone (200°C safe), which did get off the mold really easy. 2 versions. One with printed pillars for the holes and one with holes…
I created this table fan to cool my workstation, extract solder fumes and cool down the print bed faster after printing the 8 feet are there to use it in any position thus the fan is an ideal helper for many tasks I used this fan for the…
top- und bottom-layers weglassen um infill freizulegen Wandanzahl für mehr Stabilität erhöhen
Durch die Anschläge welche man einfach mit Kleber von unten an das Printbed klebt, kann man die Platte ganz einfach an den Anschlag schieben, damit es Perfekt auf dem Heizbett sitzt, ohne dass man es immer mühselig ausrichten muss. Sie…
This printbed scraper is great for removing prints, is easy to print and it gets the job done without damaging your printbed. Enjoy!
Printbed Scraper – a tool designed for safely removing 3D prints from the printer bed. Features a flat, thin edge for getting under prints without damaging the surface. Ideal for use with glass, PEI, or magnetic build plates
This printbed scraper is great for removing prints, is easy to print and it gets the job done without damaging your printbed. Enjoy!
Version 2 - moar magnets: After feedback about the camera not sticking - probably due to weaker 6mm x 20mm x 2mm magnets than the ones I had available, the model was revised with the following changes: The 6mm x 20mm magnet is…
A small scraper I modeled in DesignSpark. It's pretty nice to remove Printed objects without scratching the bed. I also rounded the edges and corners to make it feel good in the hand. Annealing after the print is optional, but increases…
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter.
Bed Scraper | Printbed Scraper Meet your new favorite 3D printing accessory: the Bed Scraper. This is an essential tool designed for every maker who values a clean print bed and effortless print removal. Its sleek, purpose-built shape…
A useful scraper! Print with the following parameters: -15% grid infill -0.2mm layer height -2 walls -No supports Enjoy! Keep printing, -@Rendrd Designs https://www.printables.com/@RendrdDesign_2195477
This is a remix of the “Prusa Saptula Printables - sample model.” by Prusa Research. I added 4 changes to the original. Changes I made: 1. I added on the underside a pattern so the spatula can wipe the printer nozzle to pull off strings…
Based on the original Ruiz Brothers project files, I've modified the blade so that it can be printed in 3 sections, and can be bolted together as per the original design - no glue required for the blade. I've included a HiltSupport file…
Just print in high resolution as recommended for the original and add a stop in the Prusaslicer to insert the magnets during the printing process. Holes fit 4x2 mm neodymium magnets. Since the tool is light no stronger magnets needed. It…
I added additional support for 10x6x2mm magnets in the legs. Now you can use either rectangular or round magnets. This is a modified design - @Jason_50683 , @DvG3DAtelier
Upload auf Printables da nur auf Makerworld verfügbar. Es passen diverse Druckplatten aller Hersteller! Dekorativ und super schön! Gedruckt mit dem Flashforge AD5M in 0,2 layer , 04 nozzle und 20% infill. Orginal Modell by PrintManufaktur…
This is a holder for your IPA-Bottle & Toiletpaper, so you'll never have to search for them again when cleaning the printbed. It's desinged to fit a bottle with a diameter of 75mm, but i have also created a holder for a bottle with 60mm…
This is my version of an ergonomic printbed / build plate scraper. It is desigend to go easy on your fingertips even when pushing hard to loosen your model from the buildplate. The wedge has an angle of 20° and a smooth transition to the…
I also modeled a scraper for you. I chose to keep it simple and practical. I hope you enjoy using it. Note: Please be careful when setting the infill percentage and make sure to use your printer’s standard settings.
Print bed scraper with Anycubic label Designed entirely for PLA Total length: 6 cm Handle width: 1 cm Scraper length: 1.8 cm Rear hole diameter: 3 mm
One of the goal for me was a lighter Printbed. So, here is the right thing. This use 500mm MGN12H with two sliders on each rail. If 600mm rail is used, the carriages can mount more on the outside. I tried to match the genuine height.…
I recommend to print it in ASA. If you have any suggestions to improve the model or correct something, let me know in the comments.
A 2g, 10minute, 1 layer test to see how calibrated your printbed is. Layer-height: 0.2mm
This is a printbed holder for 4 printbeds for the tiertime up mini Gen1.
THIS IS NOT A PRINT MODEL This model is intended to be set as a print bed model in Prusa Slicer. It does not include a texture. Category: 3D Printers
This is something I needed, since my kitchen (with the sink) is all the way across the house, it has four inner walls which should (keyword: "should") help water from escaping the basket, I suggest you test this product outside, or in a…
Small Printbed Cleaner for use with Cotton Pads . Prints flat without supports in PETG or PLA - easy and convenient way to clean buildplate. EDIT: Added a more convex version to make cotton pad stick out easier.
*Image note: the pool is on a very uneven surface, so it looks less optimal, tho it still works as intended as you can see in the before and after images. On the before, sprays over the water. In the after, it stays contained. Pool hose /…
Always useful, always needed *You can print any blade in different materials for different purposes like: TPU: Safe scraping PLA: Medium Duty PETG: Heavy Duty
PLEASE READ THE PRINT INSTRUCTIONS! TRIM IT AND DON‘T GIVE BAD RATING JUST BECAUSE YOU CAN‘T READ INSTRUCTIONS! After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be…
i have a delta 3d printer with 180mm printbed that base model dont fit i split in two parts for easy print have the base and the hull of the tank Category: R/C Vehicles
i dont found anywere a faceshield that can fit on kosel mini heatbed now i optimized it you can print only thing you need to configure on your slicer number of brim lines change to 6 and you can print this faceshield Category: Other
No se necesitan soportes de material. ¡Los proyectos están licenciados bajo la licencia GPLV3, que es consistente con las 4 libertades fundamentales del software libre, así que siéntete libre de estudiar el código, replicarlo y…
Printbed scraper Printing instructions: 0,15 mm layer height 3 perimeters Recommended material: PETG
Printbed scraper Printing instructions: 0,15 mm layer height Recommended material: PETG
malá ale zároveň robustní oboustranná škrabka, sklon 45 stupňů
My 15-year old remixed a popular design of a face shield to maximize print bed use of his multiple printers. This is a NO GLUE, snap fit design. We have printed 100 plus and feedback from medical professionals is great and they stay…
Printer: Creality CR-6 SE Layer: 0,3 Infill: 25% I use this camera mount for the pi-cam: https://www.thingiverse.com/thing:3226626
The original file didn't fit on my ender 3 V2 but I didn't want to print it in two parts. There are still lots of details where the baseplate fits in the L-boxx so it would still fit snug. I will add a make or add a photo when it has…
Attachments to enlarge the size of a Printbed Mini spool to better fit in dryer boxes and other storage. If you plan on using these in a heated dryer box, use PETG, ABS, or another material more resistant to heat than PLA. PLA will warp…
This scraper can be used to scrape 3D printed objects from the heatbed. Print material : I recomend using PLA Printingtime : ca. 2h Printer: Prusa mini+ HAPPY PRINTING :-)
Simple sturdy scraper for removing big and small stuck pieces from printbed
I like printing with lots of colors, but I don't always want to buy whole 1kg spools, so I designed a spool holder/adapter to fit Printbed's mini spools so that I can use them in my AMS. I designed a solid version and a hex version, which…
Configuration: 0.20 mm SPEED Time: 26 minutes Filament: approx. 3g I printed upsidedown.
If you like printbed.com filament like i do and you have a bambu lab ams, this is for you. Fits the printbed spool nice and snug. I printed in petg with a .6 nozzle at .3 layer height.
A raspberrypi camera printbed holder/mount for the Prusa Mini! Features: Fixable ball-joint for the camera (12mm M3 Screw). Friction-only designs kept getting loose. Easy installation to the Prusa Mini bed Optional cable-chain attachment…
Ergo Bed Scraper - the compact and quick-to-print tool for easy print removal! Ergo takes up minimal space as it can be stored by hanging it on the printer. With low filament usage and quick printing time, it's a must-have in your 3D…
UPDATE: 2023-01-31 I got tired of gluing in the adapter rings. I added flutes on the sides to ensure a tight grip. If it is too tight, you can scale the model down in your slicer. I also added a Core version that is the full with of the…
![Printbed Scraper [No scratches]](https://media.printables.com/media/prints/141162/images/1337691_481a5cba-a527-45ee-9874-636f758ee04d/large_display_img_20210426_183111_3_141162.jpg)
