Gridfinity Ribbon Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gridfinitized holder for 10 ribbons with standard dimensions of 5mm x 20m
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on simple adapters, I designed a holder for 10 basic rolls of ribbons of 5mm x 20m each. I refrained from adding an additional handle to make sure that the holder will fit into a drawer such as IKEA Alex.
The holder comes on a gridfinity adapter with screw holes and magnet holes.
What is needed?
- print file ‘Gridfinity_Ribbon_Holder_2x5’ (provided as step and stl) as often as you like
How to print
As with any gridfinity holder / bin, feel free to print in any material you like. I printed mine in basic black PLA.
No support needed, no brim needed. Other settings depend on your preference - a standard profile with 0.2mm layer height and 15% infill will do the job just fine.