1 / 1
Screw-in clip for Aqara Door and Window Sensor P2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a screw-in clip for an Aqara Door and Window Sensor P2, including parts for the sensor and round magnet.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 421
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a hidden screw-in wall clip for an Aqara Door and Window Sensor P2, including parts for the sensor and round magnet.
Design features
- Minimalist clamp holds the sensor and/or magnet in place instead of the built-in adhesive.
- Chamfered edges for easier handling and comfort.
- Screw slot will accommodate North American standard #6 or #8 countersunk wood screws.
- The screw is hidden from view when the sensor is in the clip.
Printing instructions
- Print the .stl as-oriented (on its side)
Installation instructions
Tip: Test the location first to make sure the magnet will trigger the sensor before making holes in your wall or doors!
- Screw the clip in
- Gently place the sensor into the clip (the edges will spring slightly during insertion).
Notes
- I designed this model in OpenSCAD and it's mostly parameterized. If you'd like a simple modification (i.e., outer body size, screw size, etc.), send me a message and I'll see what I can do.