1 / 1
Screw-in clip for Aqara Door and Window Sensor P2 — image 1

Screw-in clip for Aqara Door and Window Sensor P2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a screw-in clip for an Aqara Door and Window Sensor P2, including parts for the sensor and round magnet.

Rating
5 / 5
Likes
6
Downloads
76
Makes
1
Views
421
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a hidden screw-in wall clip for an Aqara Door and Window Sensor P2, including parts for the sensor and round magnet.

Design features
  • Minimalist clamp holds the sensor and/or magnet in place instead of the built-in adhesive.
  • Chamfered edges for easier handling and comfort.
  • Screw slot will accommodate North American standard #6 or #8 countersunk wood screws.
  • The screw is hidden from view when the sensor is in the clip.
Printing instructions
  • Print the .stl as-oriented (on its side)
Installation instructions

Tip: Test the location first to make sure the magnet will trigger the sensor before making holes in your wall or doors!

  • Screw the clip in
  • Gently place the sensor into the clip (the edges will spring slightly during insertion).
Notes
  • I designed this model in OpenSCAD and it's mostly parameterized. If you'd like a simple modification (i.e., outer body size, screw size, etc.), send me a message and I'll see what I can do.

Tags