Bracket for a cardboard draft shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to quickly build a draft shield around the printer using the box it came in.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
A very simple (if over-engineered :) bracket designed to hold a right-angle in a piece of corrugated cardboard 6mm (nominally ¼"). The bracket has holes to optionally push brads (small nails) through to help hold the cardboard in place.
Print 2 brackets for each corner, one each for top and bottom. Create the corner in the cardboard by scoring the cardboard sheet with a knife (i.e., do not cut all the way through), then bend along the score and push the brackets on.
With reasonable print settings, 2 brackets can be printed in just under an hour.
I do not do prints that require a printer enclosure, but my Prusa is in the basement and definitely could benefit from a draft shield. I used 6 brackets and the box my Prusa came in to create one and it really helps!