HarvestRight Freeze Dryer Drain Hose Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to prevent hoses coming through the factory cutout from getting damaged by the sharp edge of the side panels.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 417
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — NoDerivatives
Use case:
Do you have an industrial HarvestRight freeze dryer? Are your hoses getting damaged or even cut by the sharp stainless steel cutout? This is your fix!
This is a two-piece insert that clicks together. This open design allows for easy hose insertion and removal during service.
Print information:
Printed through a 0.04mm nozzle on an Elegoo Neptune 4 using PLA+. Your results may vary, but I highly recommend you ensure your printer is calibrated for best results.
Material Recommendation: Print it with PETG for elevated chemical & heat resistance.
Total Print Time: 9mins @ 350mm/s with a 17mm^3 of flow.
Print setting recommendations:
- Layer Height: 0.22
- First/Initial layer: 0.22
- Walls: 2 walls, alternating (to save print time and filament)
- Top/Bottom: 3 each, Monotonic
- Infill: 15%, Gyroid
- Solid Infill: Monotonic