HarvestRight Freeze Dryer Drain Hose Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to prevent hoses coming through the factory cutout from getting damaged by the sharp edge of the side panels.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 102
- Makes
- 0
- Views
- 421
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — NoDerivatives
Use case:
Do you have an industrial HarvestRight freeze dryer? Are your hoses getting damaged or even cut by the sharp stainless steel cutout? This is your fix!
This is a two-piece insert that clicks together. This open design allows for easy hose insertion and removal during service.
Print information:
Printed through a 0.04mm nozzle on an Elegoo Neptune 4 using PLA+. Your results may vary, but I highly recommend you ensure your printer is calibrated for best results.
Material Recommendation: Print it with PETG for elevated chemical & heat resistance.
Total Print Time: 9mins @ 350mm/s with a 17mm^3 of flow.
Print setting recommendations:
- Layer Height: 0.22
- First/Initial layer: 0.22
- Walls: 2 walls, alternating (to save print time and filament)
- Top/Bottom: 3 each, Monotonic
- Infill: 15%, Gyroid
- Solid Infill: Monotonic