Counting matching models…
Protect your wipers in the winter for a minimal cost! Even 1 clip will move your wiper away if placed in the center → use more clips for longer wipers Wiper edge does rest in the empty space, so the rubber is not deformed Bottom is…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…
This is a super handy clip for the pantry, freezer and just other bags. We use them for chip bags, and freezer stuff. I print them using PLA+, and we have clips that we are still using that have lasted 6/7/8 years in the freezer. And are…
This is a tray to freeze large Kong dog toys after you fill them. It helps keep the freezer a bit more clean and organized. I've also attached a single Kong version.
Simple storage solution for Motif Medical (or similar-sized) breast milk storage bags. I have printed multiple of these in PETG with .6mm nozzle at .28 layer height. It includes bridge support for the opening at the bottom, they should…
Intro Winter returns back to the northern hemisphere… Cold days and frosted cars are back… Safe your car wipers to be frozen to the wind screen with this easy tool! Designed to be easily installed and removed. Just place this tool below…
[update] I created a new version ( https://www.printables.com/model/663843-improved-harvestright-drain-hose-plug ) that helps maintain a good drainage angle better. You probably want that one. [/update] Didn't like the hose just resting…
I designed these boxes to mimic the cardboard boxes that ziploc or other brand freezer/sandwich bags come in. My goal was to mount them to the inside of my pantry door and to have a removable lid so that they can be refilled without…
Introduction This clip that you can use in freezing or snack bags, is quite robust with zone with self-centered hinges and suspended through cones. An idea that is not new, but I don't know if anyone has ever explored this in 3D printing…
Clip in dividers for you camper van's fridge. Two different heights, 3 and 6 cm, two different directions. Should work for fridges with 15 (might be a tight fit) to 24 mm between the grid. Trenner für den Kühlschrank im Camper. Zwei…
I ran out of cardboard cryobox dividers, so I’ve made my own. Printing in vase mode saves time considerably. I printed it from PLA and although it is not super resistant to low temperatures, it works and haven’t cracked yet. I printed…
These inserts are designed to fit in standard laboratory freezer boxes and should fit most 0.2 mL PCR tubes and PCR tube strips. The upper rack stacks on top of the lower rack with a little extra clearance for any PCR tubes already on the…
Diese Clips minimieren die Auflagefläche eines Mülltonnendeckels und verhindern so das Festfrieren. Paarweise gedruckt in Petg und custom-made für meine Sulo(?) Mülltonnen 80 L / 120 L und 240 L. Erste Leerung haben sie problemlos…
Print two of these and use Velcro cable ties to put light pressure on bags intended for freezing to keep them flat for storage until frozen. Useful for freezer organization, storage, and space saving. Fits Medela breast milk bags…
Arctic Liquid Freezer III AIO Radiator Tubes Comb 13mm spacing
I remixed the TickTock short tray stacker to eliminate the binding in the corners on the newer Harvest right trays. After some fiddling around, I arrived at a crudely modified design that seems to print well for me with no support.
This came about because our freezer handle on our 2017 GNE25JSKCFSS (stainless steel) fridge was getting loose and then fully fell off a few days later. We came to find out that these connectors are some cheap plastic piece that are just…
Load up your large sized Kong with whatever your dog is into and throw it in the freezer https://youtube.com/shorts/9JULoJBj77Y Layer Height: 0.2mm Nozzle Size: 0.4mm Infill: 10% Printer: Ender 3 V2 Filament: 1.75mm Tangerine Orange Food…
Freezer and Food Bag Clip
Freezer door key for Frigidaire, Kenmore, GE freezers. Fits the square locks. Fits the same lock as these from Amazon . >[REPLACES PART NUMBER]: Manufacturer Part Number: 216702900. Replaces Part Numbers: 216702900 06599905, 08037402,…
I broke two Glass Shelf Support Piece on my Bosch gin81aef0 freezer, replacements are way too expensive for crappy plastic parts (part number 00639092), so I modeled replacement ones and they fit perfwectly.
This float allows you to submerge the cans and then be able to take them out very fresh. The flexible tabs allow you to hold the cans well. Remember to tie the float well with a rope! For standard 330ml can measurements. 350ml or 500ml.…
Clip replacement for freezer handle GE MODEL#GFE26JSMAFSS This was just a self-quiz project because i broke the clips when i pulled too hard. Although these should probably be metal in my opinion. UPDATE 1: Updated model post printing.…
Introduction This product solves a need I've always had, the labels with the expiration date I put on the Freezer bags with sticker labs, fall. Let's say the environment inside a freezer is not sticker-friendly. Writing on the bags is a…
This a 2-piece (2 of the same part that can nest) form intended to hold a plastic freezer bag. The bag can then be filled with various foods (soups, chili, pretty much anything) and frozen into a “brick” for easy storage. Two versions are…
Die Halter werden einfach aufgesteckt, habe sie auf einer 240 Liquid Freezer II verbaut, sollte aber auch auf die anderen Modelle von Arctic passen. Da die erste Version aus pla war und deutlich instabiler Gestaltet war habe ich sie nun…
breast milk bag storage bin for freezer, designed for momcosy pouches which are 100mm wide i designed it to hold vertically even if it has 1 pouch inside it. printed with PLA without supports
I broke the opening handle of my refrigerator. I couldn't find a spare part, so i build a new one. Maybe someone can need it ;D The model of the refrigerator is or some others. Klarstein Cool Cousin (HEA9-C.Cousin) (80L) The original…
Simple AIO hose management clip, I designed this to suit the Artic Freezer III but should be fine with others. I designed it to suit 13mm hosing as the Freezer has wires and nylon braiding over the 10mm hose, so I need them to have loose…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Arctic Liquid Freezer III Mount Bracket with Dual 80mm Fan Shrouds for ASRock BC-250 An upgraded version of my BC-250 AIO mount bracket, now featuring integrated 80mm fan shrouds on both sides. The angled shrouds direct airflow directly…
Container / Dispenser for freezer (Ziploc) bags Prints in two pieces and snaps together Doesn't need supports if printed with the flat sides down
Update: version 3 has cutouts on the side 2mm deeper. Use files from folder for version 3. wiper_stand_v3-Deep.3mf file has 3 instances printed sequentially by ASA fillament wih brim. Stands supports wipers little away from windshield, so…
You can add your own design to the cover using most slicers e.g. PrusaSlicer. Then, slice for multi-color however you like. PLA does not become too brittle at -80°C. My boxes printed in December 2024 are still holding up well, and I will…
Designed for a vertical freezer door. Use Pan-Head screws to secure it. Stainless Steel would be best. The screws will easily penetrate the metal outer layer of the door. Don't over-tighten.
The Samsung RF260BEAESG/AA refrigerator has a tilting door assist mechanism to assist in opening the freezer. This is common to break and the only way to repair the unit is to replace the entire freezer front. $300+ So I designed this…
Autosampler trays for Vanquish autosamplers based on Thermo's specifications . All trays that they provide are included here however a parametric fusion360 file is included if you want to make modifications. I have included the datamatrix…
Replacement sliding hinge for integrated Fridge Freezer doors
Poignée de porte freezer référence 2636038024 ou 331318 … Compatible avec Réfrigérateur, Congélateur : AEG, Electrolux, Faure, Progress, Arthur-Martin-Electrolux, Leonard, Zanussi, IKEA, Juno, Zanker….. les supports du ressort et la…
I was tired of the ice creams in my freezer always falling over each other and having no organisation, and poor use of space meaning we can't fit new things in, so I printed a quick storage box with a small pull out handle. No supports…
Arctic Liquid Freezer Einfache Aio Lösung für ein Schlauch-Management. Die Halter werden einfach aufgesteckt, habe sie auf einer 240 Liquid Freezer II verbaut, sollte aber auch auf die anderen Modelle von Arctic passen.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The Beko 5907610100 door handles have a very poor design that puts all the stress of the handle flexing during use onto the screw hole. Being brittle plastic, they crack at this point regularly, and but are only covered during the…
The Harvest Right Wi-Fi kit is a great item, but it just hangs off the side of your freeze dryer. In order to provide some additional protection to the USB ports and cables, I wanted to create a mount to hold the Wi-Fi Adapter so it would…
One Rail insert for the left and one for the right side. The door holder brake on the weakest position because the original material ( Polystyrol) is only suitable for -10°C. Use PETG - it should hold up to -40°C Use supports everywhere…
Hey friends, An Australian brand called Multix offers a free plastic hanger which can be screwed into kitchen cupboards to hang their freezer bags. We preferred to put ours on the side of the fridge rather than screw into a cupboard, so I…
Handle for Nordfrost Freezer - might work for other freezers as well hole to hole distance = 140mm __________________________________________ Griff für Nordfrost Gefrierschank Lochabstand 140mm Print instructions Category: Replacement Parts
105x183x130mm 4.2/7.2/5in fits on the bottom shelf of our freezer, could be used for anything I suppose. Prints without supports just fine on my printer.
Michael Jackson Iconic Poses - Fedora Freeze 3D printable model.
Freeze Ray model by c177finder from Thingiverse. By parts. I printed it 75% and it's so good for the Gru costume!
Sized it up to fit the KONG XL
Update: must say after a few times of using it was not the most convenient thing in the world Remixed from Ziploc Bag Zipper, this clip is 12mm longer to work with Ziplocs that have an extra flap. I mostly use it to seal them when putting…
Náhrada zavírání mrazáčku v lednici značky Gorenje.
Concerned about the impact of plastic on our environment? Re-use your freezer and storage bags! We like to wash our freezer bags and re-use them. Wife used to have a drying rack like the one here that she bought a long time ago in a…
This 3D printable ice tray features a simple yet functional design, allowing you to create evenly sized ice cubes with ease. The flexible structure ensures smooth ice removal, making it a great addition to any kitchen or bar setup.…
Keep using these CPU coolers on old motherboards even if the original rubber-mounted custom fan is broken or lost. I tapped the fan mounting holes with ISO M4 but the self-tapping screws included with most PC fans should work just as well.
Use case: Do you have an industrial HarvestRight freeze dryer? Are your hoses getting damaged or even cut by the sharp stainless steel cutout? This is your fix! This is a two-piece insert that clicks together. This open design allows for…
The spacer is used to allow air to circulate into a portable Dometic fridge and stop mildew forming when the fridge is not in use. It fit a Dometic CFX 35.
🌌 ¡El tirano galáctico que aterrorizó a generaciones revive en estilo Funko! Capturamos la esencia de la forma final de Freezer: cuernos amenazantes, cola prensil y sonrisa sádica que congeló sangre en Namek. 💡 EL VILLANO DEFINITIVO DE TU…
My wife wanted a stand for filling freezer bags with home-made soups, curries and the like. It had to be robust, stable and be able to be safely used hands-free. It also needed to be able to accommodate a range of bag sizes and to fold…
Took the original model and remixed it to use less material and decrease print time.
This is a basic built to allow you to integrate an ESP32 device to monitor a "dumb" freezer and set alerts for any malfunctions before items inside the freezer spoil if they thaw by integrating into HomeAssistant via ESPHome. Wiring is…
Replacement door handle for the Bosch Intelligent Freezer 32 and Intelligent Refridgerator 39. This part is functional and doesn't aesthetically match the original Bosch handle. Files Male.stl + Female.stl files to glue together for…
See race85com 's original post for info on how to properly print this model. The object in my photos was printed with: 2 walls no top layers no bottom layers gyrod infill
After a longer absence from my home and freezer I was never secure that there was no power outage and the food was thawed and refrozen after the power was back. The designed modul can help me in the future to detect a malfunction during…
Replacement Freezer handle. Screw holes are 18mm from the top/bottom and 10mm from the side Handle dimensions are 200mm x 65mm
Original part has a “latch” on a long, thin (1mm thick) leg. Thin leg bends when pressed by the door and then latches when the door are completely closed. After some time this leg broke and I couldn't close shelf's door. For that reason I…
After throwing away hundreds of dollars of thawed food because the freezer door popped open in the middle of the night I designed this simple safety latch to hold the freezer door from popping open. I saw a similar design on Amazon for…
I have designed a new knob to turn the ice maker and dump the ice cubes into the box below as a replacement of broken original one. Print with PETG because PLA is too fragile.
Clips to hold stop shelves from falling off on Frigidaire FFSS2625TS0. Printed with .4mm nozzle with layer height of .3mm
Replacement door slide guide for Beko intergrated fridges and freezers. Door slide: https://www.printables.com/model/1098499-beko-fridgefreezer-door-slide
Spare part for Bosch or Siemens refrigerator. Ersatzteil für den Kühlschrank Eisfach Türhaken 029963
Clip a stacker to the end of each tray and then stack another tray on top. Maintains spacing for efficient freeze drying of multiple trays of food at a time.
Simple remix of the version by "Lloyd Summer", making the spring clip stronger and more durable. I really like the original(please go give it a Like!), but I have had issues with the clip getting deformed and struggling to keep shut when…
Simple 100 tube freezer box with lid in standard dimensions. Use clear PLA for lid, no supports or adhesion required.
Because of tight tolerances the filament need to be dry befor printing. It has been successfully printed with ABS, 0.4 nozzle and 250C on K2 Plus. It will probably work just fine with PLA or other filaments as well. 5 wall layers, bottom…
These are the plastic spring perches that keep the freezer door closed on a Dometic RV fridge.
Harvest Right Freeze Dryer Bucket Drain Hose Clip Overview This is a refined, heavy-duty drain hose holder designed specifically for the Harvest Right freeze dryer 5-gallon bucket setup. It provides a secure, stable connection for the…
Freezer side baskets for a Whirlpool side-by-side refridgerator model GS2SHKXNQ00
The bottom freezer was not fully sealed; found that one of the rails was not sucking the seal in; rather than paying to fix, printed two of these and put it on both sides. No more frosty freezer and saved me $500 :) There is a notch to…
17 years ago, we bought a Frigidaire "Heavy Duty Commercial Freezer" to keep bulk frozen goods in (we often shop at Sam's Club or Costco). It still works... but the door handle broke a year or two ago. Actually, the holes in door aren't…
This is a replacement hinge for a Siemens standing freezer. The top right hinge of my freezer broke and I could not find a replacement part. So I removed the left hinge, put it on a flatbed scanner, scanned it, imported the image into…
Gallon sized freezer bag container for Gridfinity No supports needed, print at your largest layer setting where the layers are still strongly adhered (I used 0.3mm) The bin and lid print in two parts to accommodate most bed sizes. They…
A simple trash bin that uses freezer bags (3liters, ~25cm width when flat) as garbage bags. I primarily use it for filament waste (failed prints, P1Ps poop, purge line). The bin will deform to fit parts bigger than its diameter (160mm),…
My freezer is a Brandt BFU4425SW. The original handle broke so I designed and printed this replacement. Print instructions Licence: Creative Commons - Attribution Category: Replacement Parts Print Settings Printer Brand: Prusa Printer: I3…
Der Schließmechanismus der Dometic CoolFreeze Kühlbox besteht grundsätzlich aus zwei Kunstoffteilen: Griff und “Scharnier”. Da bei meiner Kühlbox das Scharnier durch Herunterfallen des Deckels gebrochen ist, habe ich dieses möglichst…
I was frustrated with constantly digging around in my chest freezer so I decided to create cubbies to help with organization. Steps to build your own chest freezer organizer: Figure out the dimensions you need for each panel in the cubby.…
Replacement door slide for Beko intergrated fridges and freezers. Door slide guide: https://www.printables.com/model/1098674-beko-fridgefreezer-door-slide-guide
Concerned about the impact of plastic on our environment? Re-use your freezer and storage bags! We like to wash our freezer bags and re-use them. This is a more contemporary (abstract) version of my other model . Not everyone likes the…
Print in something strong and flexible like PETG, ASA etc. PETG would break immediately. This is a wedge to pry off thick bildup of ice in food freezers. You need to work it in between the freezer wall and the ice, which might be a bit of…
Quart sized freezer bag container for Gridfinity No supports needed, print at your largest layer setting where the layers are still strongly adhered (I used 0.3mm)
Organize your fridge and freezer with these customizable labels. There are versions for the door trays, shelves, and freezer bins. I'm not sure which fridges it works with, so check the 3D viewer or print 1 sample first. The most common…
Always facing the problem that (liquor) bottles have a leaking lid when putting them into the freezer? Your freezer is too low to place them standing upright? Use this Diagonal Bottle Stand! Feel free to improve (and give feedback)!
A pouring spout to suit 20L drums or similar. Thread major diameter 60mm. Thread pitch 5mm. Drum aperture diameter nominally 50mm. I printed the threaded ring with a plain diameter and applied Prusa Slicer's “fuzzy skin” to provide some…
This is a very simple solution to repair a broken hinge of a lid in the interior of a Siemens freezer or fridge. On my freezer the lid and the hinge broke due to abuse / wear and tear. The lid was always falling off, so I first designed a…
This is a door for a mini refrigerator freezer. It uses m4 screws for the hinge pins.
We have broken the door hinge of our Indesit BIAAA 14 X fridge's freezer. I took the remained complete one and modelled it and then prtined the model mirrored. Don't have a printer yourself? Contact me on my Etsy store and I'll be happy…
The Standard Holder was to small, so the basket fell down all the time. So I made a new bigger version and printed it. It turned out pretty well. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: No Resolution: 200…
