Logitech C910 Webcam Privacy Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I could not find a good privacy cover for the Logitech C910 webcam, so I made my own.
- Ocena
- 4,667 / 5
- Polubienia
- 23
- Pobrania
- 499
- Wydruki
- 8
- Wyświetlenia
- 2287
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I could not find a good privacy cover for the Logitech C910 webcam, so I made my own.
This thing is heavily influenced by the excellent C920 privacy cover by OnlyTono.
The privacy cover consists of two pieces. The base goes on top of the cam and should just clip in. Depending on the accuracy of your printer if it does not clip in firmly use some double sided tape to fix it on. Mine had no problem clipping on, being printed in PLA at 0.2 layer height. The cover itself clips into the base and fully covers the lens when it is closed. I have sized it in a way that you can still see the "camera on" lights with the cover closed.
Print instructions
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%