Ikea IVAR system - mount for shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used this mount to create a filament rack
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 716
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple holder for shelves, slats or bars. They are simply attached to the shelf by pressing six pins into the pre-drilled holes. The central part is then held in the cut-out.
The holes are 43x23mm and the slats inserted into them are one meter long. There are holes on the side for inserting screws to prevent them from sliding out.
I also add one " plain" part for making your own holes
I printed from PLA filament and 25% gyroid infill, 2 perimeters. The shelf can hold 11 filaments (1kg) without problems. If you wanted a sturdier version, I would opt for PETG and more perimeters but for me it's not necessary.