Hex wrench handles metric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn your standard hex wrenches into a easy on the hands Hex driver, or a T-handle Hex wrench
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
I created these Hex handles to make handling hex wrenches easier for low-medium torque applications. They can be oriented to work like a screwdriver or a t-handle. Can be used with Standard, Long, or ball end Hex wrenches. Handles cover a standard set from 1.5mm to 10mm.
These handles are made of 2 pieces, the handle and the plug that holds the hex wrenches in place. They are designed to be printed flat on the flat side with no supports, using 2+ perimeters and 15%+ infill. I have printed these in ABS, PETG, and PLA and all work well, keeping in mind that over torquing the handles may crack or break them. Plug should fit in to groove with a smooth snug fit so it can be removed later. If it is too tight, sand down the flat bottom surface or re-print plug slightly smaller.