UAMS: Universal Arm Mounting System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a arm mounting system designed for mounting cameras, lights, and other small things. The Arm files are not…
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 807
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a arm mounting system designed for mounting cameras, lights, and other small things. The Arm files are not free because of the time and money spent on developing them. As this project progresses, more mounts will be designed on my end, and hopefully, the maker community (that's you!) will post their custom mounts as a remix! If there are any remixes, I will link them in the "Files" step of the linked Instructable. The mounts you see there are the only ones available. If you are going to design a Mount, please Note: Mounts for mounting an Arm onto something should have a male end, and mounts for mounting something onto an Arm should have a female end.
Arms are in 50mm, 100mm, 150mm and 200mm lengths.
Instructable w/ build instructions (and other mounts): https://www.instructables.com/UAMS-Universal-Arm-Mounting-System/
Infill: 20%-50%
Support: Yes. Print on side with holes oriented horizontally.
Category: 3D Printing