Homematic IP / HmIP-PCBS Mini Repeater Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mini case for an Homematic "HmIP-PCBS" repeater board. This is easy to print.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a easy to print case / enclosure for a Homematic HmIP-PCBS board that can be used as a repeater / range extender for a Homematic IP network. This box is tiny. I used a small piece of double sided tape to glue it to the wall where it had good reception.
There is nothing much to say about this print. I printed it with PLA and used a USB 5V power supply for connecting it to the board. The box does not feature any other holes, as it is only meant for the repeater itself, which doesn't need any connection to the relays etc. on the board.