1 / 5
LJ18A3 (18mm version) holder for a Elster water meter — zdjęcie 1
1 / 5

LJ18A3 (18mm version) holder for a Elster water meter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This holds the 18mm version of the LJ18A3 inductive pulse counter on an Elster water meter.

Ocena
0 / 5
Polubienia
5
Pobrania
44
Wydruki
0
Wyświetlenia
847
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A simple holder to fix an LJ18A3 inductive pulse counter with 18mm diameter to my Elster water meter. Couldn't find the exact type of the water meter, but it has two small (slightly less than 3mm) holes in the outer rim.

You need a tie-wrap (cable tie) to fasten the sensor to the holder and two small screws to bolt the holder to the water meter. Holes in the holder are 3.5mm in diameter to allow some wiggle room for the screws :) 

Tagi