DIY Painting Booth for Makers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY Paint Booth for MAKERS
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 1089
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a DIY, collapsable, foldable, partially 3D Printed, painting booth that costs about $50.
Bill of Materials:
X5 - ½'' 10ft PVC Pipe https://www.homedepot.com/p/Charlotte-Pipe-1-2-in-x-10-ft-PVC-Schedule-40-Plain-End-DWV-Pipe-PVC-04005-0600/100348471
Spool of plastic wrap or tarp https://www.homedepot.com/p/HDX-10-ft-x-25-ft-Clear-3-5-mil-Plastic-Sheeting-RSHD3510-25C/204711653
Some wire or picture hooks to hang parts.
Required Tools
Handsaw
Scissors
Measuring Tape
3D Printer (Duh)
Printed Parts:
Overview:
Print In Place Painting Pins
Print Settings:
3-4 Perimeters and 50%+ infill on all “Hinge” components
(Threaded Hinges and Through hole Hinges)
Default Settings for all other components
(Threaded Screws, Tarp Clips, PiP Painting Pins, Top Rack Holders)
Assembly:
Cut your PVC Pipe into the appropriate lengths:
X10 30in Segments (4 for the Base and 4 for the Top) (2 for the Top Rack that holds the painting parts)
X4 60in Segments (for the Legs of the Booth)
((NOTE))
It really doesn't matter what length of PVC pipe you use, as long as the sides parallel are equal for the Base and Top Segments