Valve connector for 9/7 mm hose (print in place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A valve connector for flexible tubes
- Ocena
- 3,5 / 5
- Polubienia
- 17
- Pobrania
- 183
- Wydruki
- 2
- Wyświetlenia
- 699
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
It's a printed in place rotary valve used to connect 9mm flexible tubes (Inner diameter = 7mm). The tolerance between moving parts is 0.4mm. I also made a 0.5mm tolerance version for those struggling with 0.4. I did not try the 0.5 mm version. The 0.4mm version prints well on my Ender 3 v3 SE.
I use this valve for my ants farm. It's really useful during maintenance when you need to disconnect parts of your ants farm.
Printed in PLA+ with :
- 0.2mm layer (0.4 nozzle)
- 2 walls, bottom/top layers
- 20%infill
- w supports from the bed (trees)
- 70mm/s
==> 27minutes and 3g.
Be careful ! It can easily cut in half an ant when closing.
Do not try this system on aquariums. It is not watertight.