1 / 3
Valve connector for 9/7 mm hose (print in place) — image 1
1 / 3

Valve connector for 9/7 mm hose (print in place)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A valve connector for flexible tubes

Rating
3.5 / 5
Likes
17
Downloads
183
Makes
2
Views
699
Reviews
2

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial

It's a printed in place rotary valve used to connect 9mm flexible tubes (Inner diameter = 7mm). The tolerance between moving parts is 0.4mm. I also made a 0.5mm tolerance version for those struggling with 0.4. I did not try the 0.5 mm version. The 0.4mm version prints well on my Ender 3 v3 SE.

I use this valve for my ants farm. It's really useful during maintenance when you need to disconnect parts of your ants farm. 

Printed in PLA+ with :

  • 0.2mm layer (0.4 nozzle)
  • 2 walls,  bottom/top layers
  • 20%infill
  • w supports from the bed (trees)
  • 70mm/s

==> 27minutes and 3g.

Be careful ! It can easily cut in half an ant when closing. 

Do not try this system on aquariums. It is not watertight.

Tags