Phone holder for Indoor trainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print&mount&use phone holder for indoor trainers (bike etc...)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
Simple model made out of 2 parts which are glued together. Can be printed separately or together. Max phone width is 80mm with case and additional features:
- multiple holes for cooling
- enough space for camera avoidance (based on Honor 9X)
- large avoidance for quick fingerprint login
- high 13mm barrier which can withstand up to 1000W sprints (tested indoor on Wahoo Kickr Core)
- Up to 32mm handlebar diameter.
Glue (use Superglue for best result) together like on picture and connect with 1 tie on handlebar. Max width of handlebar is 32mm. You can go with smaller ones but model is best for 32mm.
Material: PLA
Layer: 0,2
Nozzle temp: 210
Print speed: 60
Bed temp: 60
No supports
Printer: Ender3 V3 SE
Thanks for using and I wish you all the best in Indoor Sports! Of course, when you can't be outside :)
BR