1 / 4
Bambu P1S Poop Chute + Enclosed/Removeable Bottom
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Poop Chute + has a removable bottom, fill gauge, magnets to keep it in place, and a lip to ensure it is properly closed.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 934
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
This is an excuse for me to mess around. This is my 4th design… ever. I know I have a lot to learn. Got a printer in December '23 and have been mostly printing STL's. Upgraded printers and started designing during April '24.
Parts (Optional)
I printed a model and used it without magnets. It works. The side fins from the original remix sort of stabilize it a bit.
- 5mm x 2mm magnets (Amazon)
- Side note, magnets are right about 5mm but have variability top/bottom 1.7-1.8 is what I measured
- Use Super/Plastic adhesive to attach the magnets if yours do not have adhesive on them
- magnetic strip that comes with the printer (36mm x 12mm x 2mm - which could be purchased here if you lost or used yours - they are a little different sized, but may work? Or just say screw it and buy bulk - make you own)
- SIDE NOTE - pre-align the magnets so you have the poles correct (You betcha I messed that up.)
Future Considerations
- Thicken the walls of the main body
- Redo the top magnet brackets with heavier magnets
- Fix the distorted coloring/pattern change