OSWW Crowned Pulley and New Motor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A new motor mount mechanism, redesigned pulleys with crown profile, fixed mounting dowel, and mid-size tension mount
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was having significant trouble using the bands on the v-groove pulleys and the motor mount solution in the original model. Bands work better with crowned pulleys so I redesigned the pulleys to have a larger lip and a crown profile. Now the bands will self-center and not slip off!
The new motor pulley now has a D profile hole to more securely fit the motor shaft.
I also designed a motor mount mechanism that uses 2x M3 2mm bolts attached via a thin sturdy support that is mounted on the rear plate.
Because the crowned pulleys are a bit different profile, I also included a new mid-size pulley mount for the tension arm, but I've found that with small enough bands, I don't even need a tension pulley anymore.
I fixed the threaded insert diameter hole in the mounting dowel to make the fit more secure.
Added a new midplate with a smaller hole for the motor to make the motor fit better.
There is also a new rear plate in this remix that includes an 8mm hole for mounting a female barrel connector jack if you want to improve the wiring of your OSWW/Winderoo.
