1 / 2
OSWW Crowned Pulley and New Motor Mount — image 1
1 / 2

OSWW Crowned Pulley and New Motor Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A new motor mount mechanism, redesigned pulleys with crown profile, fixed mounting dowel, and mid-size tension mount

Rating
0 / 5
Likes
6
Downloads
88
Makes
0
Views
451
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I was having significant trouble using the bands on the v-groove pulleys and the motor mount solution in the original model.  Bands work better with crowned pulleys so I redesigned the pulleys to have a larger lip and a crown profile.  Now the bands will self-center and not slip off!

The new motor pulley now has a D profile hole to more securely fit the motor shaft.

I also designed a motor mount mechanism that uses 2x M3 2mm bolts attached via a thin sturdy support that is mounted on the rear plate.  

Because the crowned pulleys are a bit different profile, I also included a new mid-size pulley mount for the tension arm, but I've found that with small enough bands, I don't even need a tension pulley anymore.

I fixed the threaded insert diameter hole in the mounting dowel to make the fit more secure.

Added a new midplate with a smaller hole for the motor to make the motor fit better.  

There is also a new rear plate in this remix that includes an 8mm hole for mounting a female barrel connector jack if you want to improve the wiring of your OSWW/Winderoo.