1 / 1
(Remix) Door Latch for no-screws baby-proofing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original was 15mm, added 14mm to 3mm for variation in cabinet doors.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 473
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
The original is around 15 mm from the cabinet door top to the Cabinet opening bottom.
Since these didn't work for all my cabinets and they are different heights I made ones ranging from 14 mm to 3 mm.
Print on the side no supports needed.
If you want to make sure these stay in place put a little bit of double sided sticky tape on the inside. No fasteners necessary