Liczymy pasujące modele…
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu
Both parts contain a hidden 10mm diameter pocket (0.2mm clearance all around) designed to fit a 10mm diameter / 5mm thickness neodymium magnet. The g-code contains a pause at 6mm height, i.e. just before the pockets gets printed over, to…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
I designed these fasteners to help me connect my spare cardboard boxes and pieces together to make structures for both my kids and our bunnies! Each bracket features non-destructive teeth that help to grid the cardboard for extra grip.…
The idea for these started out after I printed a different Gridfinity cleco holder yesterday, that's available here on Printables. I thought it was a great model, and well designed, but I also identified several changes I would like to…
The complete set of #Stemfie3D cap nuts. STEMFIE news 👉 X.com/stemfie3d
With new printers come new fasteners. Over the years I have had Mk3(S)(+), Mk4(S), Mini(+), and XL-1TH and XL-5TH printers from Prusa, and a growing number of spare parts. I found @SpongyBob_8783 's parts tray super useful, but it was…
Easy attachment to vertical surfaces with screws. Suitable for any flat objects such as phone tablet and others.
!!!!! fixed leg size Scale 1/18 No fasteners needed, for 2 cars *You could add a led strip to illuminate the car underneath
These fasteners are suitable for Renault Clio 3 Phase 2 frames (82 00 393 246). They break quite easily, and a plastic frame costs €15-20. Rather than replacing the whole thing, you can now replace just the fragile parts. For a good bond,…
A set of fasteners for installing the FilaPartner E1 dryer on a thermo-box.
I do not like to use glue for anything I may need or repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm screws and assorted nuts. Use the original strands and small parts. To unlock the handcuff, insert the…
I do not like to use glue for anything I may need to repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm bolts and assorted nuts. 2026-03-23 edit : my handcuffs collection . Note : you will still need a few…
The complete set of #Stemfie3D cap nuts. STEMFIE news 👉 X.com/stemfie3d
Just a remix, add a pause in your slicer and then drop the magnets in place. They hold the strong magnets just fine for
The original Lack enclosure drawers call for M2 nuts and machine screws, but I had a large stash of M3 hardware to use. STLs include the A1, A1-D, and R1 drawers, with their bottom hex nut and screw holes enlarged to accomodate M3…
Cable fasteners for cables in different formats. 1 x 2 x 1.5mm^2 2 x 2 x 1.5mm^2 4 x 2 x 1.5mm^2 2 x 2 x 4mm^2 All fasteners uses 3mm screws with countersunk head. Prints without support.
Replacement Trunk Trim Panel Fasteners for the Acura NSX NC1. The OEM fasteners are known to come loose and fall out. This replacement has more thread surface to hold than the OEM. Printed in ABS. Two versions. Version one has a slot like…
A two piece print which slides together with a tapered dovetail for a snug fit. Just screw the base in place, and slide the hook into the mating dovetail. The taper should allow some forgiveness on print accuracy.
Ender 3 S1 Y stepper motor mount upgrade. Ender 3 S1 Y stepper motor mount upgrade with two-axis fasteners . Stiffer mounting, less vibration and noise. Vibrations on the Y-axis are about 20% less, comparing the amplitude of the vibration…
This case will hold your ESP32 Cam and make sure its ventilated. There is a ventilation hole in the front, and the back is open to let the heat escape. You can also take advantage of the open back to attach a heatsink. This case does not…
Motivation I wanted to use my backpack as a pannier on my bike rear rack and found a few solutions online that involve drilling through the backpack strap or bolting some clamps to the straps. I wanted something that wouldn't require…
In the original model, if I squeezed the handle too hard I could pinch the blade which prevented it from moving. I added a back to prevent that. Make sure your flow is spot on or you'll have to sand the handles to get the blade to not…
I've wanted to make an airbrush booth from some foam boards to complete a few projects. I've tried a few corner connectors, but wasn't content with the results. I designed these to fit tightly without falling apart or leaving large gaps.…
Update 2025-0319 Added Shelf and Drawer Gridfinity options as well as 21mm Gridfinity vase mode bin. Update 2025-0311 I finally tried printing this in PLA with a 0.4mm nozzle and NOTHING fit ! ouch. with the 1mm nozzle and petg its a…
Some easy to use film reel fasteners made for the MovieStuff RetroScan Mark I/II film scanners. You may want to use a left and right threaded 5/16"-18 tap to cut the threads as they tend to be a bit tight otherwise. I usually print left…
A simple locking mechanism I made for the louver/jalussi accessory to Volvo 740.
Cheek Protection fasteners for mask Dye 0.08 mm fill 100%
Side fasteners for fastening BMW GS Motocross Helmet (one world) visor. And an additional slightly longer version.
30-Slot Organizer for Fasteners – optimized for MK4 / CORE One / etc. This is a compact, ergonomic organizer for 30 different fasteners — perfect for building a Prusa MK4, CORE One, etc. Made it while building the Prusa CORE One for the…
A hidden inner corner fastener/cleat for a picture frame deck corner that still allows for some wood movement in the lengthwise directions. The corner fastener should be mirrored for the other orientation. Also an angled edge fastener.…
Its a lid for the Ergonomic Organizer for Fasteners (e.g. for CORE One Kit Build) bin thing https://www.printables.com/model/1359251-ergonomic-organizer-for-fasteners-eg-for-core-one by @247printing Once I was done upgrading my MK4S to…
Print Settings: The model was tested before uploading. The dimensions on the model match the cable size.
My own version of axis fasteners(bracket) for the EASYTHREED K10 3D machine.
Print one handle normally and another mirrored. Fasten with 12mm M3 bolts and nuts. Press or glue additional nuts into the handle and blade for weight. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No…
Painted silver with some weathering paint and blood splatter. Used together with Christophe Nys "Frankensteins Monster Bolts" Can be found here: https://www.thingiverse.com/make:736471
Please heart and download if you like this model, it helps me put time into creating more useful items! V5.1 update - added cutout for center filament guide NOTE: This must be printed ABS, ASA or better temperature and creep resistant…
Please heart and download if you like this model, it helps me put time into creating more useful items! V5.1 update - added cutout for center filament guide NOTE: This must be printed ABS, ASA or better temperature and creep resistant…
FreeCAD project file on GitHub: github.com/…/freecad-course .
A small remix of jnewt's Spacecat Launch Pad case that adds counterbored holes to the high profile cap and case to accommodate M3x16 screws to better secure the cap and case together. I was having some issues with my printer's tolerances…
I just made it in Blender by deleting the cutting edge and extruding the created faces, then I curved the tip of the blade using a torus and a boolean function. I like to print mine with 100% infill and 6 walls for added support. Handles…
!!!!! fixed leg size Scale 1/18 No fasteners needed, for 2 cars *You could add a led strip to illuminate the car underneath
These fasteners are suitable for Renault Clio 3 Phase 2 frames (82 00 393 246). They break quite easily, and a plastic frame costs €15-20. Rather than replacing the whole thing, you can now replace just the fragile parts. For a good bond,…
Material: PLA Send me a tip if you like my design, it allows me to develop further. https://www.paypal.com/ncp/payment/9VZBUXLWFZ43Q You can buy my other models on Cults. https://cults3d.com/en/users/SavAn3D/3d-models
A set of fasteners for installing the FilaPartner E1 dryer on a thermo-box.
Inspired from Kreg True-FLEX™ Featherboards There are two versions, « TF_Featherboard_Easy_to_print.stl » is easier to print but need a little more material (~15%). « TF_Featherboard.stl » need less material, but is a little harder to…
These are a 3D printed alternative to brass paper fasteners. Use OpenScad to customise the gap to get the perfect spacing for whichever craft you're doing. Here are some ideas: Toy clock Skeleton Phonics fans Pinwheels shadow play puppets…
Edit: I've reverse-engineered the model into proper STEP files if you want to edit it. Also available on OnShape under the name Balisong Mk II. The STEP files are the most up-to-date files and the ones I would recommend using. With…
Toyota Rav4 Inner Fender liner fasteners, not at all like the original but work great.
This tray is intended for someone who needs to disassemble or repair something and doesn't want the screws and nuts to roll around the table. The pockets in the tray can also be used for fasteners removed in important steps. Then they are…
Designed to hide fasteners on one side and hold them in place when turning screws. Requires pausing the print job to insert M3 nuts (for my set up, this was at layer 24) for the file named 'bottom' Tree style support breaks away easily…
Adding the M4 nuts is now sort of a pain but at least it will be clean right?
If you found my things useful, you can buy me a cup of coffee: paypal.me/FirmaOnbenul Zijdeur/spatbord/achterpaneel Trim Moulding Strip Auto Fasteners Plastic Clips voor VW/GOLF/MK1/Jetta als pen gebruik je een stukje 1.75mm filament Side…
They can be useful for integrating into other multi-piece designs and joining pieces together.
It can generate much stringing when print, if it is then check you process settings: retraction, temperture, speed. I printed only sample of fasteners not box - its work fine. I add fusion 360 file so you can modify it.
Fasteners for mosquito nets (bottom right corner) This project can be customized in openSCAD Category: Replacement Parts
I wanted a neat looking hanger of some kind to hang my dogs harness on the wall and out of the way. I didn't like many of the hangers I found as they either used keyhole to secure the hook or the fasteners were completely visible. I…
I printed it all out in PETG with my tuned profiles and for some reason I couldn't get the nut and bolt to screw together, so I CADed up a new one, it is a bit bigger, but small enough that it still rests on a flat face so it shouldn't…
The complete set of Stemfie3D open threaded nuts. get.stemfie.org x.com/stemfie3d
I finally jumped on the bandwagon and put my printer in chains. A few of johnniewhiskey's links were too skinny for my setup as I have a few JST-SM connectors. So I needed to loosen my belt. Ha ha ha. I tried Chilbet's model and it is a…
Made this piece to secure an M10 thread to the ceiling. The screws are 4x40s the shape is to provide strength in the area that connects the base to the cylinder. Does what it needs to do! In order to screw the thread in the 3d printed…
Easy to print Wall mounting Cardboard support clips! Used them to Support and hang my stepsons Wayne Gretsky Cutouts!
I do not like to use glue for anything I may need or repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm screws and assorted nuts. Use the original strands and small parts. To unlock the handcuff, insert the…
Updated v1 box with v2 cantilever clips and included more sizes which can be found here --→ https://www.printables.com/model/146721-cable-management-box Cable management box to store surge protectors and tidy up cables. Now with…
The awning of the garden swing broke. The revision of the breakdown showed the weakness of the fixing washers. Developed stronger ones. Printed with plastic PLA, filling 90%, plastic ESUN Please take a look at my page, maybe you will find…
I do not like to use glue for anything I may need to repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm bolts and assorted nuts. 2026-03-23 edit : my handcuffs collection . Note : you will still need a few…
Easier to insert into your Honeycomb Storage Wall. If the No-Tabs version is too loose, try a One-Tab version. As always, your mileage may vary. Includes: "Fasteners and parts for attaching hooks and objects" & “Parts for attaching…
This is a side mounted lid holder designed for the top glass lid of the Creality K1 Max printer. It is deep enough to support the use of normal socket head cap screws, and not the low profile type that is much less common to have on hand.…
Backplate for the low compact display mod for ender 3 displays by Proper Printing https://properprinting.pro/product/ender-3-low-compact-display-mod/ Great looking mod, I do not like a exposed back PCB though just in case i accidently…
The cable holders can be fastened to any flat surface with either small wood screws or adhesive. It is available with 1, 2 and 3 loops to attach cables to with 10mm wide hook-and-loop fasteners ('Velcro'). For dimensions see attached…
The complete set of Stemfie3D threaded rods. get.stemfie.org x.com/stemfie3d
The spool holder is now mountable with M3 socket head fasteners (ISO 4762).
Subbuteo Official Fences are the angled fences with vinyl stickers on each panel, great design but no way to fix them down, until now. Screw these fasteners down to a board (you can use tiny railway track self tapping screws 1.4 x 10mm)…
Printing Print all parts as they are orineted in the project file. Use a lower layer height for the screws and the blade for finer treads, 0.15 worked just fine for me. Use supports on the inner half of the handle and use 100% solid…
A Cleat and a hook that slips over it to cleanly hide the fasteners. I have had best luck with a good strong PETG but it should work with most PLA+ filaments etc. Works great to add some hooks in the closet behind a clothes hanger rod or…
The complete set of cam-locking #Stemfie3D nuts. STEMFIE news 👉 X.com/stemfie3d
The complete set of adhesive-mount #Stemfie3D nuts. STEMFIE news 👉 X.com/stemfie3d
The complete set of symmetric threaded barrel #Stemfie3D nuts. STEMFIE news 👉 X.com/stemfie3d
The complete set of symmetric through-hole threaded barrel #Stemfie3D nuts. STEMFIE news 👉 X.com/stemfie3d
The complete set of #Stemfie3D threaded open nuts. STEMFIE news 👉 X.com/stemfie3d
The complete set of #Stemfie3D cam-locking pins. STEMFIE news 👉 X.com/stemfie3d
The complete set of fully-threaded #Stemfie3D screws. STEMFIE news 👉 X.com/stemfie3d
A simple thing to attach an ikea copla (60412017) extension to a 30x30 bed beam. There are ovtersts for two M3 bolts at the top, which can be attached via a fusible sleeve or via a nut on the opposite side. Designed for printing without…
Happy printing, and if you like my models you can follow me for more awesomeness! I designed this sea-mine last month as a challenge for our pet crayfish Crusty. He was always climbing everything (air pipes, thermometer, plants) and is…
This is an case for an ESP32 board with room for cables to be solderd to the pins.
There are two plate models, one for heat-set inserts and one with standard hex nuts. Heat sets designed for M4 threads There is a small lip so you can snap the insert in place then melt it. Hex nuts model designed for M4 nuts ("standard"…
My son wanted a towel bar that was closer to his height, and rather than trying to find a match to the existing metal one, I decided to design an attractive 3D-printable system that let me show off some nice pieces of wood from the…
Press fit “fasteners” for the robot desk organizer. Didn't have the right fasteners at home and these did the trick!
This is a 3D printed magnetic fabric and/or pattern fastener. With this tool, it is easier to hold pieces of fabric or patterns together without the need for pins. Pins can sometimes damage or be difficult to use with some fabrics (such…
Fastener kit for AzViper's Z Gantry Brace. Should also be semi-compatible with WickedFog's original creation. Print; 8 x "screw" 4 x "shoulderscrew" 2 x "lefthandrodend" 2 x "righthandrodend" Combine these with any of the 2020 slot…
Two parts require supports. I have included them with and without designed supports. Additional parts required: quantity 2 M4 standard nuts quantity 1 socket head cap screw (40 to 50mm long) I have included a .stp file of my design like…
This fastener(fastex) is for an Adidas barcade.
Screwiverse but sized for native HSW fasteners! I loved the idea of Screwiverse, but being unable to use the massive library of existing HSW fasteners without an adapter was less than optimal. I expanded the opening in the insert and the…
![[Proper Printing] Ender 3 compact display mod backplate (no extra fasteners needed)](https://media.printables.com/media/prints/625997/images/4963338_23506deb-2e25-4eb1-a896-27396c10eff4_a111db7a-d55d-48b4-8df9-0a194867838d/20231025_130045.jpg)
