Rope Tie-Down
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple, strong, easy to print rope tie down. I ran supports inside the hex holes. Just make sure you give yourself…
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 214
- Wydruki
- 1
- Wyświetlenia
- 971
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple, strong, easy to print rope tie down. I ran supports inside the hex holes. Just make sure you give yourself enough clearance to easily remove the supports. Takes (2) 5/16 bolts. (Designed for use with ABS tolerances.)
Print Settings
Printer Brand:
FlashForge
Printer:
Dreamer
Doesn't Matter
Supports:
Yes
Notes:
I accidentally fused my supports to the inside of the hex hole on my first print. This made them hard to remove. (My fault) So just make sure to give your support structures sufficient clearance. Don't worry about the ugly layer above the supports, because the bolt heads will cover it up.
Category: Sport & Outdoors