Kingman Eraser magazine MOD-FS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 2-24-18 I haven't had much time to work on this mag, but I did find out that trying to make .43 caliber (first-…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 510
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2-24-18
I haven't had much time to work on this mag, but I did find out that trying to make .43 caliber (first-strike-like) rounds is going to be a pain with a standard .4mm nozzel. So instead, I think I'm going to try to make a conversion kit to turn our chaser/eraser's into .50 cal markers. I'll try to get to work on it here soon. Then maybe I can make a .50 cal (first-strike-like) round a lot easier. Plus I never had much luck with .43 cal paintballs any way. I'm hoping .50 cal will make the marker more practical.
I am working on making a conversion kit for the Kingman Eraser/Chaser to be able to shoot a FS-like round. None of this stuff has been tested or even yet printed for that matter. The magazine will use the original magazines parts (at the moment), and a new receiver and sleeve are yet to come. The hole at the bottom of the mag body is not tapped out, so you'll have to either do that yourself with a tap, or maybe even try driving the screw into the plastic to see if it self taps. I'm currently working on a skirt that you'll be able to glue your 11mm paint balls into to make the FS-like mini rounds. Print, test, enjoy! Don't forget to leave your suggestions comments and feed back.More to come!
Category: Sport & Outdoors