1 / 4
ESP32 + AD8232 EKG Heart Rate Monitor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for ESP32 WROOM devboard and AD8232 Module for EKG signal
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 618
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Simple enclosure for both ESP32 and AD8232 HR module. ESP Wroom devboard fits in very tightly - there are two holes on the bottom to push it out if needed. AD part comes with screw holes.
You need 2 M3x16mm screws to hold the top part in place.
Printed with Ender 3 v2, there is some Z wobble on photos.
In slicer I placed it as in photo, so it hasn't got any bed marks on any side.