Bowden PTC Coupling / Bulkhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to connect two 10mm bowden PTC fittings. Designed to penetrate my enclosure.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this to allow my filament to enter my enclosure while keeping things pretty well sealed. Fits a ½" hole (say 12mm?) and threads together using hollow M10 threads. each piece accepts a 10mm bowden PTC fitting (which doesn't use M10 threads, its a 1/8" BSP pipe thread)
I've used a short bowden tube to ensure there is little friction through this connector. Eventually, the tube will extend to a filament dryer which I don't have yet!
Printed in Duramic 3D Orange PETG with .6mm nozzle and .15 layer height.
My enclosure wall is ¾", this will fit from about ½" to nearly 1" thick wall. f3d and step files included for remixing