Bowden PTC Coupling / Bulkhead
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Used to connect two 10mm bowden PTC fittings. Designed to penetrate my enclosure.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I designed this to allow my filament to enter my enclosure while keeping things pretty well sealed. Fits a ½" hole (say 12mm?) and threads together using hollow M10 threads. each piece accepts a 10mm bowden PTC fitting (which doesn't use M10 threads, its a 1/8" BSP pipe thread)
I've used a short bowden tube to ensure there is little friction through this connector. Eventually, the tube will extend to a filament dryer which I don't have yet!
Printed in Duramic 3D Orange PETG with .6mm nozzle and .15 layer height.
My enclosure wall is ¾", this will fit from about ½" to nearly 1" thick wall. f3d and step files included for remixing