Counting matching models…
Printed in ABS you can watch more instructions in this video: https://youtu.be/Fi0ZqGbZryw Editor note: I want to add that installing some kind of fuse is gonna be a good idea and if you pass the wire true the metal to use a rubber…
I designed this to get my PTC heater up off of the heated enclosure floor to allow airflow for the fan. Printed in ASA. No supports. The heater I used was this: Constant temperature Electric fan heater PTC fan Auto heater Small space…
…Please be sure to hit like & post a make, I'd love to see your prints! WARNING! If you do not know how to wire this system correctly & safely I STRONGLY recommend you DO NOT attempt to print or use this model as you are dealing with…
This is a mod for the Phrozen Sonic Mighty 8K/12K. It is a lid spacer/riser and frame for a PTC heater and W2310 temperature controller. The spacer is used so that there is no drilling/cutting of the cover and base for cabling and…
I bought a PTC heater to build my own filament dryer that would allow the hot, wet air to escape instead of being trapped in the box like "professional" dryers do (bad design!), but the mounting was not very user friendly, so I created…
Hello there! This is a simple holder for a 60x60 PTC heater. It mounts to the rear corner of a Ratrig V-Core or other printers with 3030 extrusions. The frame mount design is based on the top lead screw constraints of a Ratrig V-Core. The…
No supports, printed at 50% speed. https://www.amazon.com/dp/B0BTYFXQKS?ref=ppx_yo2ov_dt_b_product_details&th=1
…Please at least be sure to hit like & post a make, I'd love to see your prints! Here is my design for an automatic thermostat controlled & fully programmable PTC heater system mainly for the Elegoo Saturn S & OG printers. I have included…
Camber heater with derby shield. It is secured by the enclosure panel bolts with no modifications. I installed the a thermal fuse between the PTC heater core and cover. You will need: 1 x PTC 400w heater 1 x 220v fan 2x M3x50 2x M3x40 2x…
I wanted to make a PTC heater mount for a PTC heater since my printer is in the garage, and despite the snow outside I have printing to do. I remixed MegaWill's minimalist[?] design to fit the z-rail on the Saturn 2, and did some…
I like the idea from @ BlueThunder05 of his remix. But my PTC heater was 60^2 instead of 80^2. I wasn't able to change his FreeCAD design. So I exported it into fusion and cut 20mm sections in two dimensions (x&y) and 19mm in z.…
The heater bracket and frame mount can be assembled in different configurations to suit the need. I put one in each of the bottom corners of my chamber. I angled the heaters by 20 degrees to blow toward the middle under the bed. The idea…
reduction/pass through the enclosure wall for example for this heater: https://a.aliexpress.com/_mPlGPcS I didn't want the heater touching the wooden wall. So I created a reduction and at the same time a passage through the wooden wall.…
The stand lets you install the heater to either blow upward or blow downward in your machine. Deflector only sits on top of the heater as its facing upward blowing heat towards the top glass. Nothing fancy. The tolerances were perfected…
I built a custom enclosure for my Prusa printers, and with all structural parts printed in ASA, maintaining stable conditions for ASA, ABS and similar materials is now straightforward. Using a DTC2201 temperature controller, the enclosure…
I loved the model from @riethmueller, but the chance/likelihood to pinch the fan cable caused some issues - so I added a channel to feed the cable via during insertion
Please refer to the video for instructions : https://youtu.be/GcW0If6udEY Parts List: 1xSTC-1000 (Digital Temperature Controller) https://s.click.aliexpress.com/e/_DBbQJTF 1xPTC Heater (12v 200w) https://s.click.aliexpress.com/e/_DkmW3E5…
This is an enclosure and mount for a PTCYIDU PTC heater and fan. It is designed to be mounted to a two-slot aluminum extrusion rail using M4 T-nuts and screws. All parts can be rotated 180 degrees so that the heater and the cable can be…
Have Fun, if you have questions just ask, ill help as good as i can :) Most of the parts require AMS or similar for colours. If something do Have Fun, if you have questions just ask, ill help as good as i can :) Most of the parts require…
My Config: [temperature_sensor chamber] optional for chamber temp sensor_type: Generic 3950 #pullup_resistor: 4700 sensor_pin: PF9 min_temp: 0 max_temp: 100 gcode_id: C: C [heater_fan Chamber_Heater] ## Hotend Fan - FAN0 Connector ## in…
使用12032风扇，取消PTC内置风扇，从机柜下部吸入冷空气进行加热，从顶部引入热风，使内部气流循环，提高加热效率
Hello! Here is a mount enabling the attachment of a 60 mm PTC Heater ( like this one ) in the RatRig VCore 4. Tested in a 300 size, according to the CAD models, it should fit in the other sizes. BOM: PTC Heater (…
I'm sharing it in case anyone finds it useful, I haven't used it in the end, but it works perfectly.
Needed a PTC Holder with a little more room clearance between the lid as well as more space for the wiring. Utilized 64bitcube Saturn 2 Z-stanchion bracket assembly cap to attach it to the top:…
Replaces the rather useless metal plate that is covering the control board of the printer with a chamber heater. Uses the readily available PTC heater modules; “220V AC 300W” in my case (more like 450W btw). The housing of the module…
This is a vertical desk stand for the Sabrent 252W USB PD charger (model AX-8PTC), a product recently popularized by Jeff Geerling and others for its great feature set. The charger has a IEC60320 C8 socket at the bottom. The stand is…
This is a captcha card I made based off of an image. Its mostly accurate, but not perfect. The tall version is 38.1 mm, the regular version is 12.7 mm, and the small version is 9.525 mm.
I recently purchased the S4U and had a PTC heater I had built for my used Mars 1 last year when I got into resin printing on the cheap. The PTC heater was designed by rsilvers and I found it on thingiverse (…
For those, who wants housing blank (without logo).
A three part chamber heater enclosure for some generic 12V/24V PTC heaters. Print the enclosure in high temp ABS/ASA! Use 4xM3 heat set inserts to attach the cover and 2xM4 inserts to attach the arm. I am running the fan in the heater…
Printer brand: Bambulabs Printer: Bambu P1S Rafts: No Supports: No Resolution: .2mm layer height Infill: 100% Filament brand: Sanesmart Filament color: Neon Green Filament material: TPU 95a Notes: I used the Bambu P1S Generic TPU settings…
I designed this to allow my filament to enter my enclosure while keeping things pretty well sealed. Fits a ½" hole (say 12mm?) and threads together using hollow M10 threads. each piece accepts a 10mm bowden PTC fitting (which doesn't use…
This is a remix of the original riser to make it printable on smaller build plates. All 4 parts are held together with M3 6mm (4x) screws. Should fit nicely to your SLA printer. You need to print 4 parts: front left (FL) front right (FR)…
I modified the original Heater Stand for PTC Heater design by @indymusician_238719 because my PTC heater measured 80x80mm and I wanted to keep it slightly tilted to direct the heat more towards the center of my Original Prusa Enclosure.…
📟 Overview A clean and compact parametric enclosure for 0.96" OLED displays (SSD1306 type). Designed for embedded and IoT projects where you want a professional-looking output device instead of exposed electronics. 🧠 Why this exists Most…
This PTC heater holder will help you mount it to the top of the 4020 aluminium extrusion. With the 45 degree rotation the enclosure panels won't choke the heater fan. Also there is a thermistor holder. With this you can monitor the air…
A simple mockup of a PTC Heater with its fan, 60x60mm model. I've created it for a project i'm working on for an existing printeer and also for my own DYI printer i'm trying to build from scratch. Feel free to use it.
Print in ABS or ASA or PC blend carbon power on the heater only with exhaust closed (recycling air)
This is a CAD model of the 750W PTC heater with correct dimensions.
Due to shorter cables on my PTC heater, I needed to lower the position of the heater to put the cables through the riser.
My printer enclosure required heating due to the low temperatures in my workshop. The published equipment did not meet my requirements and I have a different thermostat in use for temperature control. The holders and model carriers…
I was looking for a PTC Heater mount for my Ender NG and couldn't find anything that I thought would work well and be sturdy, so I made this one. It's a simple design and very easy print. Best to print in PETG or something with higher…
Made as a tribute to the Wild One at Six Flags America. You will be missed. 1986-2025. The PTC Six Row Train is a classic train design found on most coasters by PTC (Philadelphia Toboggan Coasters). They are usually filled with classic…
220V 750W AC Thermostatic Electric Heater PTC Fan Heater Incubator Industrial Heating Element Surface Insulation.…
I wanted to use the linked 250W PTC Heater instead of the 500W heater that is meant for the spicy meatball Voron 2.4 heater mount, but it left a large air gap for the fans. This directs the fan air through the heater instead of around it.…
Mounted one of these ( https://tinyurl.nu/ptc ) as a chamber heater. works well. mount is for 2020 extrusion. no supports needed.
It's getting colder and I was having a hard time keeping my P1S chamber warm to prevent warping of certain filaments like ABS and ASA. I saw some chamber heaters online, but didn't want to spend that much for a simple heater so I decided…
This thermostat was used for control. Disassemble the receiver and use only the board. Used Brass Heat Set Insert 2mm for control board and 3mm for replacement bases.…
This is a mounting frame I designed specifically for DIY heating projects. It is built to support four 500W PTC heaters and allows for the installation of three 120mm fans to effectively circulate the hot air. This model is ideal for…
Holder for Halot One Category: Parts
This is in super early development. Once I confirm everything is hunky dorey, I'll remove this section. If you give it a go before I have a chance to update it, take it all with a pound of salt. I'm working things out as quickly as I can.…
I changed the used soldering iron to an Ersa PTC70, so i needed another adapter. Because i don't want any marks on this iron, i also designed a tpu ring to go inbetween. You need to print both parts to fit the iron! Print the adapter in…
J'ai essayé de rester fidèle au modèle de base. Les cotes sont respectées. Je ne suis ni un pro de Fusion 360, ni un ingénieur en mécanique. C'est un modèle assez simple, au final :)
Promptclip-Automatedmodeling
Cad files with full, part-less, and adapted for printing without supports mounts for pts heaters. As I know, original are made from pa66(nylon66). so you need something like pa/pa cf, i guess
Print three part separately and glue them together. I used PLA, my heater is only set to around 30C and it is attached to the intake side so should not be a problem. The printed model on the photo has a higher extruded grid, but that made…
Print without support 0.2 layer height
A stand for the PTC Heater Mount, which aligns the heat direction to the model for Lack enclosure for Elegoo Neptune 3 Pro. thermal thread insert M3- 2pc The holder model is located at the link:…
Mount your AX-8PTC power supply on a DIN rail. Uses 4 bolts and 4 square nuts to attach the MFG mounting plate (6-32 or M3). The sliding carriage might be stuck, so gently twist and wiggle to release after printing.
Nothing to describe. REMEMBER to allow the cool air to flow through the fan into the chamber, otherwise the fan will demagnetize. :)
We have Captcha's online—so why not offline? As robots take over the world, you might need help distinguish your human friend from your robot one with this irlCaptcha. The goal: arrange the pieces to allow a steel ball to run down the…
For best results print the button on its side. Just add a bit of glue. 最良の結果を得るには、ボタンの側面に印刷します。挿入する前に、底に接着剤を少し塗ってください。
*** USE AT YOUR OWN RISK*** Printed adapter to use a 12032 fan combined with a PTC chamber heater for chamber heating
…Please be sure to hit like & post a make, I'd love to see your prints! WARNING! If you do not know how to wire this system correctly & safely I STRONGLY recommend you DO NOT attempt to print or use this model as you are dealing with…
The stand lets you install the heater to either blow upward or blow downward in your machine. Deflector only sits on top of the heater as its facing upward blowing heat towards the top glass. Nothing fancy. The tolerances were perfected…
📟 Overview A clean and compact parametric enclosure for 0.96" OLED displays (SSD1306 type). Designed for embedded and IoT projects where you want a professional-looking output device instead of exposed electronics. 🧠 Why this exists Most…
I modified the original Heater Stand for PTC Heater design by @indymusician_238719 because my PTC heater measured 80x80mm and I wanted to keep it slightly tilted to direct the heat more towards the center of my Original Prusa Enclosure.…
These are the mounts I used for my 24v 300w PTC heater using a 60 x 60 x 15mm thick 24v fan.
A PTC heater for closed pressure chamber, for mounting on the floor. I have installed it on my RatRig printers, but it is also suitable for Voron etc. BOM 3 Countersunk screws M5x10 (M5 x 12 fits too) 1 Head screw M6 (to mount at the…
I needed a way to neatly mount 5 PTFE connectors for my Prusa XL. The mounting bracket can be mounted in any orientation and securely holds the connectors while still allowing access to the release rings. Open the .3mf file for…
This is a fan duct and ptc heater mount for a diy filament dryer using 9733 fan and a rectangular PTC heater. These parts are widely available on online platforms. The fan is 12V 0.6A and is marketed as 2.4A used as barbecue or used oil…
Requires an M3 nut and bolt to assemble. I printed it in PETG without supports. Assembly should be self explanatory. Added FreeCAD file for customisation.
I like the simple design of the original version, but needed something for a 3030 extrusion. The added thickness adds material and printtime, but works great for me. Thanks to @3DKrinter for the original design
The part is fixed to the desk using 2 screws (behind), the charger slides in and a tab with a stop secures it in place. The part can be printed in PLA with just a few supports.
Wanted to mount my AX-8PTC on the side of my equipment stack, and Nicolas Massé's design was a great start! You can mirror the design in your slicer if you want to mount on the left side. Fusion .f3d design file included.
This is a mounting bracket for a PTC element. It happens to fit a 250w 120v PTC element found in a small desk heater -- I don't know how universal it is. This is more of a building block you can edit to make what you want. I'm going to…
🧼 Overview A fully parametric set of caps designed to hide screws and wall plugs for a clean, finished look. Perfect for exposed fasteners in walls, furniture, or DIY builds. 🧰 What’s included Two types of caps: 🔘 Screw head cover 🔘 Wall…
This is a cover for the PTC connector of Nissan Leaf 2013-2023 (AZE0, ZE1) batteries when re-used as stationary energy storage. This part will cover the HIGH VOLTAGE terminals which are not used in such a case. Improved version with…
Here's a holder for a PTC heater I made for heating my 3D printer enclosure which has a fan angled so pulls air down the side of the enclosure and blows down through the heater circulating the hot air. Can be used anywhere which you want…
This is a remix from the Photonsters PTC Heater Unit made by X3msnake located here https://www.thingiverse.com/thing:3442165 This version uses a relay to control the fan and PTC heater instead of a thermostat so it can be controlled by…
I wanted to print the heater parts on my Voron FDM printer. The source design was intended to be printed on a resin printer. Because of this the ring component is made up of four separate pieces that are intended to be glued together.…
I wanted to print the heater parts on my Voron FDM printer. The source design was intended to be printed on a resin printer. Because of this the ring component is made up of four separate pieces that are intended to be glued together.…
This design allows you to mount an 80mm fan in between two pieces of 2020 extrusion. The ideal use for this is to mount a PTC heater to the other side of the extrusion for a chamber heater. The heater could be used to heat the chamber of…
Use an M6 screw or double sided tape to attach it somewhere.
Simple box with lid sized for a 77mm x 62mm x 6mm aluminum PTC heater element (e.g.…
Plastic mounts are not recommended since the fan will fail at some point, afterwards your mounts will melt! Use at your own risk. I used the mount without corner because I have wires going next to the extrusion.
