1 / 3
Holder for PTC heater for Ratrig V-Core or 3030 extrusions
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple holder for a 60x60 PTC heater. Mounts to the rear corner extrusion of a Ratrig V-Core.
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 161
- Makes
- 2
- Views
- 1,246
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Hello there!
This is a simple holder for a 60x60 PTC heater. It mounts to the rear corner of a Ratrig V-Core or other printers with 3030 extrusions. The frame mount design is based on the top lead screw constraints of a Ratrig V-Core.
The PTC heater is attached to the holder using the screws that mount the fan to the heater.
BOM:
- 60x60 PTC heater
- Each part printed once
- 2x M6 x 12 mm caphead screw
- 2x M6 T-nuts
- 1x M5 x 12 mm caphead screw
- 1x M5 locknut
Print in something high temp resistant, obviously ;-) I used PCCF.
Have fun!