1 / 3
Holder for PTC heater for Ratrig V-Core or 3030 extrusions
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder for a 60x60 PTC heater. Mounts to the rear corner extrusion of a Ratrig V-Core.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 161
- Wydruki
- 2
- Wyświetlenia
- 1246
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (1)Kolekcje (61)Powiązane
Hello there!
This is a simple holder for a 60x60 PTC heater. It mounts to the rear corner of a Ratrig V-Core or other printers with 3030 extrusions. The frame mount design is based on the top lead screw constraints of a Ratrig V-Core.
The PTC heater is attached to the holder using the screws that mount the fan to the heater.
BOM:
- 60x60 PTC heater
- Each part printed once
- 2x M6 x 12 mm caphead screw
- 2x M6 T-nuts
- 1x M5 x 12 mm caphead screw
- 1x M5 locknut
Print in something high temp resistant, obviously ;-) I used PCCF.
Have fun!